make a krink from a standard ak kit

DTDK · 03-06-2009, 12:53 AM

I am sure there is something i am missing here, but couldnt one make a krink out of standard ak kit by shortening the front end components?
then get a shorter gas piston and buy or make a front sight / gas block?

what else am i missing on this thought?

KernelKrink · 03-06-2009, 04:05 PM

You can make a shortened AK similar to a Krink, but the actual factory produced ones have several differences. The main one is the topcover is hinged at the forward end, the piece it attaches to is where the rear sight base would normally be. Inside this block is a pin which pushes out over the gas tube to retain it when the topcover is closed and retracts when it is open. The rear sight has also been moved to the topcover.

All those specialized pieces are rare and expensive outside of a kit, by the time you purchase them (if you can find them) the actual Krink kit may just be cheaper. If you just want a shortened AK that has the general looks of a Krink, it can be done much cheaper using modified standard AKM parts as you suggest.

knall · 03-06-2009, 08:50 PM

If your gonna shorten an AK go shorter than a krink.

Otherwise just buy a krink or an amd

03-06-2009, 12:53 AM	#1
DTDK Member AKaholic #: 33509 Join Date: Feb 2009 Location: minnesota Posts: 43	make a krink from a standard ak kit I am sure there is something i am missing here, but couldnt one make a krink out of standard ak kit by shortening the front end components? then get a shorter gas piston and buy or make a front sight / gas block? what else am i missing on this thought?

03-06-2009, 04:05 PM	#2
KernelKrink Curio & Relic AKaholic #: 2036 Join Date: Apr 2004 Posts: 7,533	You can make a shortened AK similar to a Krink, but the actual factory produced ones have several differences. The main one is the topcover is hinged at the forward end, the piece it attaches to is where the rear sight base would normally be. Inside this block is a pin which pushes out over the gas tube to retain it when the topcover is closed and retracts when it is open. The rear sight has also been moved to the topcover. All those specialized pieces are rare and expensive outside of a kit, by the time you purchase them (if you can find them) the actual Krink kit may just be cheaper. If you just want a shortened AK that has the general looks of a Krink, it can be done much cheaper using modified standard AKM parts as you suggest.

03-06-2009, 08:50 PM	#3
knall Curio & Relic AKaholic #: 5181 Join Date: Jan 2006 Location: northern NH Posts: 4,301	If your gonna shorten an AK go shorter than a krink. Otherwise just buy a krink or an amd

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)