cetme bolt getting suck need help

damage_mas · 01-16-2009, 04:47 PM

Just finished my cetme and when i shoot it the bolt gets stuck behind the hammer its like the disconnecter is slipping and letting the hammer up faster than the bolt can pass by. need help

RemMax · 01-16-2009, 08:14 PM

Makes me wonder if your carrier is traveling to far to the rear.....

If so you could possibly put a recoil buffer in the rear of the receiver and see if this helps.

Otherwise I would check the bottom of the carrier to make sure it is smooth and not damaged in any way.

Just a thought,
RemMax

allesennogwat · 01-16-2009, 08:18 PM

Try moving the bolt with the buttstock removed. It might be pinching the rear of of the receiver causing the bolt carrier to bind.

TopGun · 01-17-2009, 06:32 AM

Go to militaryfirearmsforums.com lot's of good info there. You could have a bent recoil spring rod, or if you bent up your own the side rails are not formed with the final forming operation. Also your trigger pack may be sitting up too high and the shelf needs adjustment.

YMMV

damage_mas · 01-17-2009, 03:47 PM

yea, the rod is bent. but when i take the fcg off and pull the trigger then try to push the hammer back down it does not catch the disconnector

could it be the ammo
??

nalioth · 01-17-2009, 06:40 PM

Quote:

Originally Posted by RemMax

If so you could possibly put a recoil buffer in the rear of the receiver and see if this helps.

Please don't do this.

You can definitely crack your receiver with an aftermarket recoil buffer.

The Cetme has a recoil buffer built into the stock as a factory part.

allesennogwat · 01-17-2009, 09:39 PM

Quote:

Originally Posted by damage_mas

yea, the rod is bent. but when i take the fcg off and pull the trigger then try to push the hammer back down it does not catch the disconnector

could it be the ammo
??

Are they full auto trigger parts? Sounds like it , with the auto sear missing.

damage_mas · 01-18-2009, 12:05 PM

yea, they are the full auto hammer, trigger, and disconnector

allesennogwat · 01-18-2009, 01:13 PM

The hammer won't reset with the selector in full auto with the auto sear removed. The hammer should reset with the selector set to semi auto.

damage_mas · 01-20-2009, 10:09 AM

it was the buffer i made a stock and temporary put a screw in it, but when i put the buffer back in it worked fine thanks for the help

01-16-2009, 04:47 PM	#1
damage_mas Member AKaholic #: 10979 Join Date: Feb 2008 Posts: 30	cetme bolt getting suck need help Just finished my cetme and when i shoot it the bolt gets stuck behind the hammer its like the disconnecter is slipping and letting the hammer up faster than the bolt can pass by. need help

01-16-2009, 08:14 PM	#2
RemMax Senior Member AKaholic #: 6213 Join Date: Jul 2006 Location: Indiana Posts: 669	Makes me wonder if your carrier is traveling to far to the rear..... If so you could possibly put a recoil buffer in the rear of the receiver and see if this helps. Otherwise I would check the bottom of the carrier to make sure it is smooth and not damaged in any way. Just a thought, RemMax __________________ Gun Control Is Being Able To Hit Your Target!

01-16-2009, 08:18 PM	#3
allesennogwat Curio & Relic AKaholic #: 3738 Join Date: Apr 2005 Posts: 32,193	Try moving the bolt with the buttstock removed. It might be pinching the rear of of the receiver causing the bolt carrier to bind. __________________ Daraclor: A brand of anti-malaria pills which we had to drink every week while on the border. Legend had it that these would make you turn yellow and that you wouldn't be able to tan.

01-17-2009, 06:32 AM	#4
TopGun Member AKaholic #: 934 Join Date: Nov 2003 Location: Southern NH Posts: 172	Go to militaryfirearmsforums.com lot's of good info there. You could have a bent recoil spring rod, or if you bent up your own the side rails are not formed with the final forming operation. Also your trigger pack may be sitting up too high and the shelf needs adjustment. YMMV __________________ As Conan the Barbarian says, " It's not how hard you can hit, it's how hard you can get hit and remain standing". John 3:3

01-18-2009, 01:13 PM	#9
allesennogwat Curio & Relic AKaholic #: 3738 Join Date: Apr 2005 Posts: 32,193	The hammer won't reset with the selector in full auto with the auto sear removed. The hammer should reset with the selector set to semi auto. __________________ Daraclor: A brand of anti-malaria pills which we had to drink every week while on the border. Legend had it that these would make you turn yellow and that you wouldn't be able to tan.

01-17-2009, 03:47 PM	#5
damage_mas Member AKaholic #: 10979 Join Date: Feb 2008 Posts: 30	yea, the rod is bent. but when i take the fcg off and pull the trigger then try to push the hammer back down it does not catch the disconnector could it be the ammo ??

01-18-2009, 12:05 PM	#8
damage_mas Member AKaholic #: 10979 Join Date: Feb 2008 Posts: 30	yea, they are the full auto hammer, trigger, and disconnector

01-20-2009, 10:09 AM	#10
damage_mas Member AKaholic #: 10979 Join Date: Feb 2008 Posts: 30	it was the buffer i made a stock and temporary put a screw in it, but when i put the buffer back in it worked fine thanks for the help

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)