WTB Build services

bausch · 09-27-2008, 10:32 AM

I need a reliable builder to build 2 or 3 of my kits on Ohio ord receivers.
I believe I have all the compliance parts if not I will purchase what I need.
The completed rifles must be N.Y. compilant (yes I should move but can"t)
At my local gunshop his AK's have the evil bayonet lug removed and a muzzle nut is tacked over the break threads.I want to buid 2 74's and a AMD 63 all kits new and matching as purchased years ago from Wolfsburgh Bob
Also what is the best receiver to buy for a Romy G build
Regards Bausch

bausch · 09-28-2008, 07:59 AM

Wow! 55 views and no replies Am I on the right forum?
Well if there is a reason no one is interested at least stand up and state it
Regards Bausch

HarvKY · 09-28-2008, 08:51 AM

From what Ive observed lately, most builders are so backed up with AK work (some bigger name guys are 6months +) that I doubt any are cruising these sites looking for work.

Im sure there are some great independent bullders that frequent the site, but unless they are a licensed gunshop an individual is setting himself up for a lawsuit if there are any problems with the firearm.
Lots of times a friend might build one for someone, or you can get necessary help at a build party

Good luck
HarvKY

speedracer · 09-28-2008, 04:10 PM

Quote:

Originally Posted by HarvKY

From what Ive observed lately, most builders are so backed up with AK work (some bigger name guys are 6months +) that I doubt any are cruising these sites looking for work.

Im sure there are some great independent bullders that frequent the site, but unless they are a licensed gunshop an individual is setting himself up for a lawsuit if there are any problems with the firearm.
Lots of times a friend might build one for someone, or you can get necessary help at a build party

Good luck
HarvKY

Exactly. 6 month backlog is short from what I have read on some sites.

AKbarber · 09-29-2008, 09:34 AM

Quote:

Originally Posted by bausch

I need a reliable builder to build 2 or 3 of my kits on Ohio ord receivers.
I believe I have all the compliance parts if not I will purchase what I need.
The completed rifles must be N.Y. compilant (yes I should move but can"t)
At my local gunshop his AK's have the evil bayonet lug removed and a muzzle nut is tacked over the break threads.I want to buid 2 74's and a AMD 63 all kits new and matching as purchased years ago from Wolfsburgh Bob
Also what is the best receiver to buy for a Romy G build
Regards Bausch

I would just go with an NDS-3 from DCI. These are made especially for the Romy G's. Try Overland Industries in Arizona. You can Google their name and find their website and plenty of info about them. Great quality work plus I think they build New York and California compliant rifles for residents in those states. Turn around time may be a couple of months depending on how busy they are. I personally had a build back in my hands in about 5 weeks, but I think they are taking longer now due to a backlog of work.

phirehouse · 09-30-2008, 06:47 AM

maybe, salbo arms?

09-30-2008, 10:20 AM

I contacted this gentleman re: his needs. I posted build services under gunsmithing on this board.
Still accepting work for late October/November. Check out my post. Very affordable.
Thanks,
Carl
East Bloc Imports
Mesa, Az
FFL 07
eastblocimports@cox.net

09-27-2008, 10:32 AM	#1
bausch Member Bronze Contributor AKaholic #: 898 Join Date: Nov 2003 Posts: 130	WTB Build services I need a reliable builder to build 2 or 3 of my kits on Ohio ord receivers. I believe I have all the compliance parts if not I will purchase what I need. The completed rifles must be N.Y. compilant (yes I should move but can"t) At my local gunshop his AK's have the evil bayonet lug removed and a muzzle nut is tacked over the break threads.I want to buid 2 74's and a AMD 63 all kits new and matching as purchased years ago from Wolfsburgh Bob Also what is the best receiver to buy for a Romy G build Regards Bausch

09-30-2008, 10:20 AM	#7
azpatriot Guest AKaholic #: Posts: n/a	Build services I contacted this gentleman re: his needs. I posted build services under gunsmithing on this board. Still accepting work for late October/November. Check out my post. Very affordable. Thanks, Carl East Bloc Imports Mesa, Az FFL 07 eastblocimports@cox.net

09-28-2008, 07:59 AM	#2
bausch Member Bronze Contributor AKaholic #: 898 Join Date: Nov 2003 Posts: 130	Wow! 55 views and no replies Am I on the right forum? Well if there is a reason no one is interested at least stand up and state it Regards Bausch

09-28-2008, 08:51 AM	#3
HarvKY Member AKaholic #: 13584 Join Date: Jul 2008 Location: USA Posts: 157	From what Ive observed lately, most builders are so backed up with AK work (some bigger name guys are 6months +) that I doubt any are cruising these sites looking for work. Im sure there are some great independent bullders that frequent the site, but unless they are a licensed gunshop an individual is setting himself up for a lawsuit if there are any problems with the firearm. Lots of times a friend might build one for someone, or you can get necessary help at a build party Good luck HarvKY

09-30-2008, 06:47 AM	#6
phirehouse Member AKaholic #: 5918 Join Date: May 2006 Location: clearwater, fl Posts: 105	maybe, salbo arms?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)