AKM Build Tutorial. Romy G + NDS-3

gunplumber · 07-08-2008, 02:58 PM

Will make a few minor updates to incorporate feedback from some members.

http://www.arizonaresponsesystems.co.../pagenotes.htm

AK Gator · 07-12-2008, 09:18 PM

Enjoyed the tutorial. I always like seeing people's custom made tools (bolt carrier, leaf spring screwdriver, etc.). I really like your AK display idea, too! I may borrower it, but angle the plate so it can mount on a wall. Thanks for posting.

Utga Schleigle · 07-14-2008, 01:49 AM

Thanks again will take a loook!!!!

Took a look. More info and clearer instructions. Fun stuff.

FL-AK · 07-15-2008, 11:17 AM

Just went through again, more serious read this time.

Very methodical and informative

I even found an answer to a question I had about installing the barrel. I know what you meant but I think you left something out here:

Quote:

"if front trunion is canted relative to the rear sight base, there is a small bit of adjustment you can make my hammer on the side of the trunion to rotate it."

I especially like the photos of all those AK's sitting together

I tell ya, the more I mess with this stuff, the more I think 600 is a bargain

gunplumber · 07-15-2008, 11:33 AM

well, I knew what it was SUPPOSED to say, so I didn't read what it really said. Thanks for catching it, I'll fix it.

07-08-2008, 02:58 PM	#1
gunplumber Arrogant Bastard AKaholic #: 328 Join Date: Nov 2003 Location: Surprise, AZ Posts: 2,721	AKM Build Tutorial. Romy G + NDS-3 Will make a few minor updates to incorporate feedback from some members. http://www.arizonaresponsesystems.co.../pagenotes.htm __________________ T. Mark Graham, Master Gunsmith Arizona Response Systems

07-14-2008, 01:49 AM	#3
Utga Schleigle Veteran Member AKaholic #: 8480 Join Date: Jun 2007 Location: LB Peoples Republik Kalifornicators Posts: 1,755	Thanks again will take a loook!!!! Took a look. More info and clearer instructions. Fun stuff. __________________ PLEASE WEAR EYE PROTECT & PROTECTIVE GEAR IN SHOP!!!!!! You can order another part from from manufacturer, but you can't order another finger or eye from your mother & father. *This DOES NOT constitute GOOD or SANE legal - professional gunsmithing - psychiatric - CPA - MD - gardening advice. Please contactact qualified professional in their respective specialties.* Go ahead mix and match professionals with what ever problem you have??? That would be funney!!!!! Last edited by Utga Schleigle; 07-14-2008 at 02:09 AM.

07-15-2008, 11:33 AM	#5
gunplumber Arrogant Bastard AKaholic #: 328 Join Date: Nov 2003 Location: Surprise, AZ Posts: 2,721	well, I knew what it was SUPPOSED to say, so I didn't read what it really said. Thanks for catching it, I'll fix it. __________________ T. Mark Graham, Master Gunsmith Arizona Response Systems

07-12-2008, 09:18 PM	#2
AK Gator New Member AKaholic #: 10372 Join Date: Dec 2007 Location: Palm Beach County, Florida Posts: 16	Enjoyed the tutorial. I always like seeing people's custom made tools (bolt carrier, leaf spring screwdriver, etc.). I really like your AK display idea, too! I may borrower it, but angle the plate so it can mount on a wall. Thanks for posting.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)