Help with firing pin

parsons_12b · 03-09-2008, 11:31 PM

I broke the firing pin on my Chinese Ak today. Any ideas were to start looking for a new one?

Any ideas will help
Thanks
J.P.

Ding · 03-09-2008, 11:36 PM

polytech has them parsons..look in the barrel section.they have the floating type and spring loaded.

http://www.polytechparts.com/

jwc0506 · 03-09-2008, 11:38 PM

a romy g one will work.

also when you re-install the re-taining pin-be sure it's on the side that's stiffer. it should go in a bit more difficult. also it should be - free floating.... pops in and out.

03-09-2008, 11:31 PM	#1
parsons_12b Member AKaholic #: 7292 Join Date: Dec 2006 Location: Oregon Posts: 173	Help with firing pin I broke the firing pin on my Chinese Ak today. Any ideas were to start looking for a new one? Any ideas will help Thanks J.P.

03-09-2008, 11:36 PM	#2
Ding onomanopeoia AKaholic #: 7821 Join Date: Mar 2007 Location: Right Behind You Posts: 8,469	polytech has them parsons..look in the barrel section.they have the floating type and spring loaded. http://www.polytechparts.com/ __________________ I only listen to the 14 little voices in my head,the other voices mean nothing. Voice#7-"There's Nothing That a Screwdriver to the Temple Can't Fix" SFC I Corps 68'-72'

03-09-2008, 11:38 PM	#3
jwc0506 Curio & Relic AKaholic #: 4865 Join Date: Nov 2005 Location: Oregon Posts: 5,121	a romy g one will work. also when you re-install the re-taining pin-be sure it's on the side that's stiffer. it should go in a bit more difficult. also it should be - free floating.... pops in and out.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)