COMPLIANT PARTS

RON573 · 02-07-2007, 08:30 PM

I have a technical question here. It may seem dumb but since I don't know the answer, it is not dumb to me.
1. I know that I must not have more then 10 foreign parts from the magic list. OK, so far. On that list the uppr and lwr handguards are considered to be one part. My question is, are the turnion(s) considered to be one part or are they considered to be one part for front and one part for rear?
2. Someone out there is selling 5.45x39 followers for the magazines. Can anyone give me a contact email or web page for these? If I put one of these in each magazine, that is considered one less foreign part off the list I think. Correct?
Thanks for the help.
PapaRon

allesennogwat · 02-07-2007, 08:39 PM

The upper handguard doesn't count.The lower handguard counts.The rear "trunnion" really isn't a trunnion but a receiver block.Only the front trunnion should count.The US followers will help the parts count.

allesennogwat · 02-07-2007, 08:42 PM

Check here for US made AK74 5.45mm followers

http://www.akfiles.com/forums/showth...ight=followers

RON573 · 02-07-2007, 08:56 PM

Dear ALLESENNOGWAT
Thanks for the information on the compliants parts. If I only need to count the front trunnion, then that helps. Also, I will check out the site you mentioned about the mag followers. That would gain me another part.
Thanks for quick response.
PapaRon
PS: I tried sending you a PM but your box is full and it will not allow me to send anything to you. You might want to empty your in box or at least delete some old messages.

CAMPYBOB · 02-08-2007, 04:49 PM

the rear trunnion is not a proscibed part. it is not counted as an official 'part'.

the front trunnion is counted as it is a barrel mount.

you might try FSE (first son enterprises). i know they may 7.62 x 39 followers and floorplates. i don't know if they did the 5.45, but there are some out there.

02-07-2007, 08:30 PM	#1
RON573 Member AKaholic #: 4267 Join Date: Aug 2005 Location: The People's Republik of Kalifornia Posts: 82	COMPLIANT PARTS I have a technical question here. It may seem dumb but since I don't know the answer, it is not dumb to me. 1. I know that I must not have more then 10 foreign parts from the magic list. OK, so far. On that list the uppr and lwr handguards are considered to be one part. My question is, are the turnion(s) considered to be one part or are they considered to be one part for front and one part for rear? 2. Someone out there is selling 5.45x39 followers for the magazines. Can anyone give me a contact email or web page for these? If I put one of these in each magazine, that is considered one less foreign part off the list I think. Correct? Thanks for the help. PapaRon

02-07-2007, 08:39 PM	#2
allesennogwat Curio & Relic AKaholic #: 3738 Join Date: Apr 2005 Posts: 32,184	The upper handguard doesn't count.The lower handguard counts.The rear "trunnion" really isn't a trunnion but a receiver block.Only the front trunnion should count.The US followers will help the parts count. __________________ Daraclor: A brand of anti-malaria pills which we had to drink every week while on the border. Legend had it that these would make you turn yellow and that you wouldn't be able to tan.

02-07-2007, 08:42 PM	#3
allesennogwat Curio & Relic AKaholic #: 3738 Join Date: Apr 2005 Posts: 32,184	Check here for US made AK74 5.45mm followers http://www.akfiles.com/forums/showth...ight=followers __________________ Daraclor: A brand of anti-malaria pills which we had to drink every week while on the border. Legend had it that these would make you turn yellow and that you wouldn't be able to tan.

02-07-2007, 08:56 PM	#4
RON573 Member AKaholic #: 4267 Join Date: Aug 2005 Location: The People's Republik of Kalifornia Posts: 82	THANKS Dear ALLESENNOGWAT Thanks for the information on the compliants parts. If I only need to count the front trunnion, then that helps. Also, I will check out the site you mentioned about the mag followers. That would gain me another part. Thanks for quick response. PapaRon PS: I tried sending you a PM but your box is full and it will not allow me to send anything to you. You might want to empty your in box or at least delete some old messages.

02-08-2007, 04:49 PM	#5
CAMPYBOB Moderator AKaholic #: 15 Join Date: Sep 2003 Location: minerva, ohio Posts: 3,977	the rear trunnion is not a proscibed part. it is not counted as an official 'part'. the front trunnion is counted as it is a barrel mount. you might try FSE (first son enterprises). i know they may 7.62 x 39 followers and floorplates. i don't know if they did the 5.45, but there are some out there.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)