Up to 60% Off Daily Deal Products. Palmetto State Armory
The Ultimate Gun Belt, US Made, Lifetime Warranty, Free Shipping. Shop Now.
Gorilla Ammo Free Shipping when you order 10 Boxes or more.
Shop all the current Lone Wolf closeouts here

Go Back   The AK Files Forums > Rifle Forums > AK-47s

Notices

Closed Thread
 
Thread Tools
Old 10-28-2006, 02:21 PM   #1
akpete
New Member
 
AKaholic #: 6669
Join Date: Oct 2006
Posts: 7
Default New site rail added to a Arsenal AK

Can a scope site rail or mount be added if none priorly existed?I want to mount a scope mount bracket onto my arsenal.k-var sells them with rivets.I should have bought mine with it already on at the factory.
akpete is offline  
Old 11-01-2006, 10:14 PM   #2
t-stox
New Member
 
AKaholic #: 5924
Join Date: May 2006
Location: long island
Posts: 9
Default

You have two choices, get the ones that come with rivits IF you know how to install rivits OR you can buy a special one that comes with two screws that all you need to install is a drill with the same diameter as the screw. I just got a SLR with no mount and ordered the screw variety, gonna put it on tomorrow.
I gots it at veriforce tatical.
http://www.veriforcetactical.com/tac...ccessories/44/

To prevent loosening during shooting i suggest a Steel lock washer and some loc-tite for good measure.
t-stox is offline  
Old 11-03-2006, 10:24 AM   #3
dstorm1911
Curio & Relic
 
dstorm1911's Avatar
 
AKaholic #: 4307
Join Date: Aug 2005
Location: Mostly Tucson, AZ
Posts: 2,758
Default

Kalinka optics has your rail for $24 its the MTK-02 exact same as the MTK-01 which is the factory installed rail except the rear rivet hole is positioned to not need to be under the rear trunion rivet, I just got 4 of them in and they work perfectly and look to be factory rails. They don't come with the rivets but ya can get some at the hardware store OR what I did was just used the same rivets as used for the front trunion of an AK, ya could also easily drill out the 3 (yes THREE) rivet holes then tap them and use allen head cap screws from the inside of the reciever. Takes 10 minutes to install using rivets
dstorm1911 is offline  
Old 09-06-2009, 11:30 PM   #4
ENGLISH MIKE
Banned
 
AKaholic #: 98
Join Date: Nov 2003
Location: East of Maine by a few miles...
Posts: 3,499
Default

Bump due to overconsumption of falling down water.
ENGLISH MIKE is offline  
Old 09-07-2009, 01:31 PM   #5
Black_Wolf
Curio & Relic
 
Black_Wolf's Avatar
 
AKaholic #: 8402
Join Date: Jun 2007
Location: Noneya
Posts: 4,613
Default

~Snub~
Black_Wolf is offline  
Old 08-15-2012, 11:04 PM   #6
European_Firearms
Senior Member
 
European_Firearms's Avatar
 
AKaholic #: 163445
Join Date: Jul 2012
Location: Florida
Posts: 667
Default

Yes you can have one installed, I didn't wan't to snub you so I figured I would help.
__________________
I carry a gun because I can't carry a cop, Or throw a rock at 1200 FPS
European_Firearms is offline  
Old 08-16-2012, 12:10 AM   #7
Bulgy
Member
 
AKaholic #: 161260
Join Date: Jan 2012
Location: washington
Posts: 473
Default

Quote:
Originally Posted by European_Firearms View Post
Yes you can have one installed, I didn't wan't to snub you so I figured I would help.
Don't think your help is needed. The op hasn't been on the site since 2006. Look at the date.
Bulgy is offline  
Old 08-16-2012, 01:18 PM   #8
European_Firearms
Senior Member
 
European_Firearms's Avatar
 
AKaholic #: 163445
Join Date: Jul 2012
Location: Florida
Posts: 667
Default

Quote:
Originally Posted by Bulgy View Post
Don't think your help is needed. The op hasn't been on the site since 2006. Look at the date.
Well I didn't wan't to snub him so I thought it would be the right thing to do.
__________________
I carry a gun because I can't carry a cop, Or throw a rock at 1200 FPS
European_Firearms is offline  
Old 08-16-2012, 09:33 PM   #9
BlenderWizard
Senior Member
 
BlenderWizard's Avatar
 
AKaholic #: 8068
Join Date: Apr 2007
Posts: 581
Default

I am having rails installed on my g guns right now. I got the rails from Apex. And they are proper rails, that rivet through the rear trunnion
BlenderWizard is offline  
Old 12-02-2012, 02:14 AM   #10
skipbo32
Veteran Member
 
skipbo32's Avatar
 
AKaholic #: 162695
Join Date: May 2012
Location: san antonio, texas
Posts: 1,237
Default

"don't snub me bro!"
skipbo32 is offline  
Old 12-02-2012, 10:11 AM   #11
AdamP123
((((-(-(-_-)-)-))))
 
AdamP123's Avatar
 
AKaholic #: 154955
Join Date: Nov 2010
Location: PA
Posts: 4,837
Default

Side rails are really great for optics. akpete, welcome to the Files.
AdamP123 is offline  
Old 03-27-2016, 04:01 PM   #12
longhorn_92
Member
 
AKaholic #: 177190
Join Date: Sep 2014
Location: Texas
Posts: 258
Default

Snub you later...
longhorn_92 is offline  
Old 03-27-2016, 04:49 PM   #13
barnbred
Curio & Relic
 
AKaholic #: 164399
Join Date: Sep 2012
Location: MO
Posts: 3,038
Default

Pete!
barnbred is online now  
Old 04-20-2016, 05:00 PM   #14
.30-06
basket case
 
.30-06's Avatar
 
AKaholic #: 163310
Join Date: Jul 2012
Location: South Carolina
Posts: 574
Default

Snub nose revolver
__________________

Deo Vendice
.30-06 is offline  
Old 04-21-2016, 02:21 AM   #15
tasteslikemetal
Member
 
tasteslikemetal's Avatar
 
AKaholic #: 182931
Join Date: Nov 2015
Location: Honolulu, HI
Posts: 237
Default

Must be an inside joke... Snub

Seriously is there a quick explanation to this thread?
tasteslikemetal is offline  
Old 01-21-2017, 05:10 PM   #16
SoonerOX
((10))- Resident Chupacabra
 
AKaholic #: 186304
Join Date: May 2016
Location: Pittsburgh, Commonwealth of Pennsylvania
Posts: 309
Default

Quote:
Originally Posted by tasteslikemetal View Post
Must be an inside joke... Snub

Seriously is there a quick explanation to this thread?
Look for akpete's I guess I'm being snubbed thread. Been going for a decade. Heh
__________________
Perform or die- Rob Ski
Fuck you and your gun control.
SoonerOX is offline  
Old 01-21-2017, 05:38 PM   #17
mengra1
Veteran Member
 
mengra1's Avatar
 
AKaholic #: 184774
Join Date: Feb 2016
Location: Kansas City, Missouri
Posts: 1,207
Default

aw man. I didn't even get to snub him and now he's back.

ak master mount might work. like 50 bucks no permanent mods needed
__________________
No worries mate. I have two PSAK47 gen1s in my safe....lol. I wake up at night, I can hear their cast trunnions failing.... --64890
mengra1 is offline  
Old 01-21-2017, 10:24 PM   #18
dArK 47
Curio & Relic
 
dArK 47's Avatar
 
AKaholic #: 167665
Join Date: Feb 2013
Location: Orlando, FL
Posts: 2,761
Default

AK Master Mount. Boom. Done.

Don't gay-up Milled receiver with DIY drilling and rivets.
dArK 47 is online now  
Old 01-21-2017, 10:54 PM   #19
Smitty762
Member
 
Smitty762's Avatar
 
AKaholic #: 190764
Join Date: Dec 2016
Location: The Republic of Texas
Posts: 183
Default

Quote:
Originally Posted by dArK 47 View Post
AK Master Mount. Boom. Done.

Don't gay-up Milled receiver with DIY drilling and rivets.
^^^This
Smitty762 is offline  
Old 01-21-2017, 11:39 PM   #20
Martensite
Totally Phased
 
Martensite's Avatar
 
AKaholic #: 188470
Join Date: Jul 2016
Location: Texas
Posts: 1,346
Default

I thought thread resurrections were not allowed on the forums? Where's Nalioth when you need him?
Martensite is online now  
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
©1998-2018 The AK FIles