Go Back   The AK Files Forums > General Forums > Marketplace

Reply
 
Thread Tools
Old 09-12-2013, 04:40 PM   #1
Dragynn
Veteran Member
Contributor
 
Dragynn's Avatar
 
AKaholic #: 170546
Join Date: Aug 2013
Location: Eriador
Posts: 1,433
Default WTS-Premium stainless steel AK grip screws

I have a batch of grip screws for AK's, plenty of different kinds of grips out there and some variation in length in AK's as well, so it is important that you measure, aftermarket grips with compartments use very short screws, some need longer than standard length.

In addition, the diameter of the recessed portion of the grip itself varies, so I am giving all dimensions of these screws and it is up to you to figure out if it will work for your application (you may need to widen the recess in some cases, on my Molot grip I turned down the diameter of the screw head a tiny bit, 30 seconds on the bench grinder and it fits down in there like it was made for it), also remember the grip nut protrudes from the receiver, and the grip screw when tightened doesn't actually go past the receiver by much.

These are premium Allen head A2-70/304 stainless steel alloy screws, A2/304 is one of the most highly corrosion resistant stainless steels made with a tensile strength of over 100,000 pounds-per-square-inch, used mainly in automotive and marine applications. These are nothing like the cheap pot-metal screws that are heavily in use.

The measurements:

6M x 1.0 x 100mm (100 mm =3.937 inches)This is the length of the screw shaft itself, the head adds an extra 6mm of length as listed below.
Head diameter = 10mm
Head depth = 6mm
5mm Allen head

Price is $3.00 shipped each, discounts if you need 5 or more.
Discrete Paypal gift or add .10 cents. No tracking on these as they go by regular mail.





*Update 10-13-13 - IM'ed to all replies in thread, shipping some out tomorrow, still have a dozen more.

*Update 10-14-13 - Shipped despite C-day PO closure, grocery store postal service FTW!

Last edited by Dragynn; 10-14-2013 at 10:13 PM.
Dragynn is online now   Reply With Quote
Old 09-18-2013, 05:32 PM   #2
Dragynn
Veteran Member
Contributor
 
Dragynn's Avatar
 
AKaholic #: 170546
Join Date: Aug 2013
Location: Eriador
Posts: 1,433
Default

BTT

I have these on both Vepr's, one using an ATI ergo grip, and the other a Molot grip ( had to turn down the diameter of the screw head a tiny bit to fit in the recess of this grip, 2 minutes on a bench grinder).
Dragynn is online now   Reply With Quote
Old 10-13-2013, 05:25 PM   #3
Dragynn
Veteran Member
Contributor
 
Dragynn's Avatar
 
AKaholic #: 170546
Join Date: Aug 2013
Location: Eriador
Posts: 1,433
Default

BTT
Dragynn is online now   Reply With Quote
Old 10-13-2013, 05:46 PM   #4
dezert lobo
Member
 
AKaholic #: 165160
Join Date: Nov 2012
Location: Mojave Dezert
Posts: 83
Default

I will take 2 ..... pm sent.
dezert lobo is offline   Reply With Quote
Old 10-13-2013, 09:42 PM   #5
synchronicity
Senior Member
Contributor
 
AKaholic #: 1223
Join Date: Dec 2003
Location: southwest
Posts: 581
Default

I'll take 5. Whats the discount and I'll Paypal so add the dime each.
__________________
"look for something built to last"
synchronicity is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 07:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.