AK 47 receiver dimensions needed"HELP"

FALMANIA · 03-11-2004, 01:19 PM

Does anyone have a blue print or the dimensions of an AK 47 receiver.
I purchased a receiver flat from Global and need to lay it out.
If you can I would like to down load it and print. It does not have to be to scale.

MlnLve · 03-11-2004, 02:26 PM

Did you try here? someone else posted this on this board.

http://pookieweb.dyndns.org:61129/AK/docs/templates.htm

I printed this out at work on our plotter. It is exactly a "D" sized drawing. I checked it against a TAPCO Romanian flat and an OOW receiver. Its pretty close to those. I honestly dont think dimensions have to be exact on a lot of the things but the magwell trigger group were dead on.

FALMANIA · 03-11-2004, 03:16 PM

Yes the drawing look very close thanks for the help.
I am curious if anyone sells the template out there?

AngryDad · 03-13-2004, 06:07 AM

acearms.com has a tutorial section which contains a receiver template. I've never used it so I don't know if it lines up correctly
GOOD LUCK!

03-11-2004, 01:19 PM	#1
FALMANIA Member AKaholic #: 1719 Join Date: Feb 2004 Posts: 27	AK 47 receiver dimensions needed"HELP" Does anyone have a blue print or the dimensions of an AK 47 receiver. I purchased a receiver flat from Global and need to lay it out. If you can I would like to down load it and print. It does not have to be to scale. __________________ wnc

03-11-2004, 03:16 PM	#3
FALMANIA Member AKaholic #: 1719 Join Date: Feb 2004 Posts: 27	thanks 4 AK 47 drawing info Yes the drawing look very close thanks for the help. I am curious if anyone sells the template out there? __________________ wnc

03-11-2004, 02:26 PM	#2
MlnLve New Member AKaholic #: 1643 Join Date: Feb 2004 Location: So' Western CT. Posts: 12	Did you try here? someone else posted this on this board. http://pookieweb.dyndns.org:61129/AK/docs/templates.htm I printed this out at work on our plotter. It is exactly a "D" sized drawing. I checked it against a TAPCO Romanian flat and an OOW receiver. Its pretty close to those. I honestly dont think dimensions have to be exact on a lot of the things but the magwell trigger group were dead on.

03-13-2004, 06:07 AM	#4
AngryDad New Member AKaholic #: 1131 Join Date: Dec 2003 Posts: 2	acearms.com has a tutorial section which contains a receiver template. I've never used it so I don't know if it lines up correctly GOOD LUCK!

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)