WTK: Price for Virgin Yugo M70AB2 UF kit & reciever

flybyntaz · 01-31-2012, 11:15 PM

I have a virgin Yugo M70AB2 under folder kit that came out of the Zastava factory as I was told rivets and all and it is still in the original box it was packaged in. It also has the original hammer forged barrel with it as well. I also have a premium Model NDS-4 receiver with the Yugo markings and a Tapco g2 hammer.

The current std NDS-4 receiver w/o Yugo selector markings is priced at $110 + S&H if you can get it.

I need to know an accurate value as I am planning on selling it in the very near term as another project warrants some $$ and I already have 3 of this style AK.

I don't plan on separating these items but rather only intend to sell as a package.

thanks in advance for any help!

ericthehun · 01-31-2012, 11:20 PM

I'd say the kit could bring $400 + easy, and the receiver is worth around $100. I'd start out at $600 + or - a bit for the pair.

BrianWV · 01-31-2012, 11:25 PM

the virgin kits used to sell slightly cheaper than the regular kits due to the amount of extra work involved with the virgin kit.
That being said, anything with an original barrel should be easy to move. I would go the gunbroker route and see what happens.

flybyntaz · 01-31-2012, 11:36 PM

Unlike some virgin kits I have seen, some of the barrel pin holes on the front sight etc are drilled as well as some of the holes in the rear trunnion (I don't remember if anything was done on the front trunnion). I did not do this, this is that way it came from the factory. I can post pics tomorrow if needed to accurately judge the price of the kit.

BrianWV · 01-31-2012, 11:43 PM

pics would be nice. I'm not saying it couldn't happen, but none of the virgin kits I ever dealt with had any barrel work done from the factory

I'd still go the GB route to get the top dollar.

auditech10 · 02-01-2012, 12:17 AM

Virgin Yugo barrels are not cut, drilled or modified in any way. At least, I have never seen one, and I have and have seen plenty

AKBLUE · 02-01-2012, 08:38 AM

The virgin and semi-virgin Yugo kits were in various degrees of completion and parts finish. Some had assembled barrel components but not barrel pin drilled and some in other stages or fully virgin. Depending on time and point of import. I think the earlier kits were the ones with partial assembly.
How do I know., the assembled barrel did not have the gas port hole drilled (unknown to my friend doing his build). After the build/assembly the test fire did not go well until he realized there was no gas port opening in the barrel. Easy fix., but weird.
Having said this., the instant kit may have been partially worked up here in the USA. Pics might help.

jroberts1968 · 02-01-2012, 08:47 AM

Here is a Virgin M70AB2. I built this virgin for a kid from Fort Hood. Nothing was finished out or started.

I.Oak47 · 02-01-2012, 09:01 AM

Why cant there be a shipment of Virgin M70's insted of all the M92's. Wow jroberts1968 that build has me drooling

01-31-2012, 11:15 PM	#1
flybyntaz Member AKaholic #: 72842 Join Date: Feb 2010 Location: Phoenix, AZ Posts: 181	WTK: Price for Virgin Yugo M70AB2 UF kit & reciever I have a virgin Yugo M70AB2 under folder kit that came out of the Zastava factory as I was told rivets and all and it is still in the original box it was packaged in. It also has the original hammer forged barrel with it as well. I also have a premium Model NDS-4 receiver with the Yugo markings and a Tapco g2 hammer. The current std NDS-4 receiver w/o Yugo selector markings is priced at $110 + S&H if you can get it. I need to know an accurate value as I am planning on selling it in the very near term as another project warrants some $$ and I already have 3 of this style AK. I don't plan on separating these items but rather only intend to sell as a package. thanks in advance for any help!

01-31-2012, 11:25 PM	#3
BrianWV Veteran Member AKaholic #: 7545 Join Date: Jan 2007 Location: WV Posts: 1,111	the virgin kits used to sell slightly cheaper than the regular kits due to the amount of extra work involved with the virgin kit. That being said, anything with an original barrel should be easy to move. I would go the gunbroker route and see what happens. __________________ http://www.wvcdl.org/

01-31-2012, 11:43 PM	#5
BrianWV Veteran Member AKaholic #: 7545 Join Date: Jan 2007 Location: WV Posts: 1,111	pics would be nice. I'm not saying it couldn't happen, but none of the virgin kits I ever dealt with had any barrel work done from the factory I'd still go the GB route to get the top dollar. __________________ http://www.wvcdl.org/

02-01-2012, 08:47 AM	#8
jroberts1968 Senior Member AKaholic #: 42724 Join Date: May 2009 Location: Denton, TX Posts: 930	Here is a Virgin M70AB2. I built this virgin for a kid from Fort Hood. Nothing was finished out or started. __________________ Jim Roberts JBI Armory FFL7/SOT 469-236-9507 http://jbiarmory.com/ http://www.facebook.com/jbi.armory Gunsmith Services / Re-Finishing Services

01-31-2012, 11:20 PM	#2
ericthehun Banned AKaholic #: 157106 Join Date: Apr 2011 Location: USA, TX, Dallas Posts: 1,025	I'd say the kit could bring $400 + easy, and the receiver is worth around $100. I'd start out at $600 + or - a bit for the pair.

01-31-2012, 11:36 PM	#4
flybyntaz Member AKaholic #: 72842 Join Date: Feb 2010 Location: Phoenix, AZ Posts: 181	Unlike some virgin kits I have seen, some of the barrel pin holes on the front sight etc are drilled as well as some of the holes in the rear trunnion (I don't remember if anything was done on the front trunnion). I did not do this, this is that way it came from the factory. I can post pics tomorrow if needed to accurately judge the price of the kit.

02-01-2012, 12:17 AM	#6
auditech10 Senior Member AKaholic #: 41649 Join Date: May 2009 Location: CO Posts: 626	Virgin Yugo barrels are not cut, drilled or modified in any way. At least, I have never seen one, and I have and have seen plenty

02-01-2012, 08:38 AM	#7
AKBLUE Curio & Relic Bronze Contributor AKaholic #: 5035 Join Date: Dec 2005 Location: Hilliard, Ohio Posts: 9,089	The virgin and semi-virgin Yugo kits were in various degrees of completion and parts finish. Some had assembled barrel components but not barrel pin drilled and some in other stages or fully virgin. Depending on time and point of import. I think the earlier kits were the ones with partial assembly. How do I know., the assembled barrel did not have the gas port hole drilled (unknown to my friend doing his build). After the build/assembly the test fire did not go well until he realized there was no gas port opening in the barrel. Easy fix., but weird. Having said this., the instant kit may have been partially worked up here in the USA. Pics might help.

02-01-2012, 09:01 AM	#9
I.Oak47 Veteran Member Contributor AKaholic #: 158242 Join Date: Aug 2011 Location: WI Posts: 1,907	Why cant there be a shipment of Virgin M70's insted of all the M92's. Wow jroberts1968 that build has me drooling

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)