HOW TO REGISTER AND GET APPROVED FOR THE FORUM

WRAMC1989 · 06-21-2018, 11:28 PM

Built a PSAK 47 last summer - I can sight it in, but the sight is terribly canted to the right.
What can be done to fix it - I live in Georgia, - would be willing to run it up to Columbia to get it fixed,,,
What can you tell me ?

runner · 06-22-2018, 02:53 AM

1-call PSA
2-Knock out pins, align sight post, redrill, use over size pins.
3-use a BFH

Post in AK-47 and get more responses.

PSA will be along shortly, I bet.

timhogan427 · 06-24-2018, 06:50 AM

look at you tube. lots of videos. as stated above, that method is best. you can clamp the barrel long ways (under handguard area) in a vice, then coerce the fsb over after removing pins. then redrill for 1/8" pins instead of 3mm. if it has 1/8" pins, buy a size larger. its easy. just make sure to relieve your detent pin for he larger pin. it will stick if you dont. if you scratch your barrel, its under the handguard, who cares. or use rags or soft jaws.

**Palmetto State Armory** · 06-25-2018, 04:43 PM

@WRAMC1989

If you PM me your order number, I can get it taken care of for you.

Thank you,

Josiah

06-21-2018, 11:28 PM	#1
WRAMC1989 New Member AKaholic #: 193532 Join Date: Jul 2017 Location: Augusta, Georgia Posts: 1	Canted sight on PSAK 47 Built a PSAK 47 last summer - I can sight it in, but the sight is terribly canted to the right. What can be done to fix it - I live in Georgia, - would be willing to run it up to Columbia to get it fixed,,, What can you tell me ?

06-22-2018, 02:53 AM	#2
runner Member AKaholic #: 181758 Join Date: Aug 2015 Location: NC Posts: 187	1-call PSA 2-Knock out pins, align sight post, redrill, use over size pins. 3-use a BFH Post in AK-47 and get more responses. PSA will be along shortly, I bet.

06-24-2018, 06:50 AM	#3
timhogan427 I am the one who knocks! AKaholic #: 178465 Join Date: Jan 2015 Location: morrow/cinci, ohio Posts: 4,554	look at you tube. lots of videos. as stated above, that method is best. you can clamp the barrel long ways (under handguard area) in a vice, then coerce the fsb over after removing pins. then redrill for 1/8" pins instead of 3mm. if it has 1/8" pins, buy a size larger. its easy. just make sure to relieve your detent pin for he larger pin. it will stick if you dont. if you scratch your barrel, its under the handguard, who cares. or use rags or soft jaws.

06-25-2018, 04:43 PM	#4
Palmetto State Armory Member Vendor AKaholic #: 182740 Join Date: Oct 2015 Location: South Carolina Posts: 448	@WRAMC1989 If you PM me your order number, I can get it taken care of for you. Thank you, Josiah

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)