Go Back   The AK Files Forums > General Forums > Survival and Preparedness

Notices

Reply
 
Thread Tools
Old 02-13-2018, 01:24 AM   #36
jstokes1
Veteran Member
 
AKaholic #: 169998
Join Date: Jun 2013
Location: Baton rouge, United states
Posts: 1,238
Default

Quote:
Originally Posted by Fade2Blk View Post
Diamond stones and practice time is all it takes. As far as hair shaving sharpness it stops cutting hair as soon as you use the blade to cut something.
Unless you are using a high wear steel such as M-390 Bolher
jstokes1 is online now   Reply With Quote
Old 02-13-2018, 08:25 AM   #37
Fade2Blk
Curio & Relic
 
AKaholic #: 176726
Join Date: Aug 2014
Location: Peaceful Country Livin'
Posts: 2,481
Default

Quote:
Originally Posted by jstokes1 View Post
Unless you are using a high wear steel such as M-390 Bolher
I must have junk steel on my Hindererís and Striderís then.
__________________
Evil Minds That Plot Destruction
Fade2Blk is offline   Reply With Quote
Old 02-13-2018, 01:44 PM   #38
jstokes1
Veteran Member
 
AKaholic #: 169998
Join Date: Jun 2013
Location: Baton rouge, United states
Posts: 1,238
Default

Quote:
Originally Posted by Fade2Blk View Post
I must have junk steel on my Hinderer’s and Strider’s then.
What steel is used on those? Because my M-390's and z-wear PMs stay hair cutting sharp after moderate use, working edge lasts even longer (I'm very impressed with Z-Wear currently, have it on a big chopped and even with hard use and batoning still cut leg hair, then strops right back. Up to a razor's edge in minutes) Check out the Lionsteel M4 if you want a nice 3.75" fixed M-390 satin blade with G10 scales for a great price. Picked mine up for 150 shipped.
jstokes1 is online now   Reply With Quote
Old 02-13-2018, 06:14 PM   #39
Dragynn
Curio & Relic
Contributor
 
Dragynn's Avatar
 
AKaholic #: 170546
Join Date: Aug 2013
Location: Eriador
Posts: 4,880
Default

Are you sharpening $100.00+ knives with premium steel? Then the suggestions in this thread are all good.

Sharpening an axe, an AK bayonet, a cheap knife, a big fucking 1095 prybar chopper? Then buy a 1x30 belt sander and an assortment of belts. Two minutes and you've got razor.
__________________
((DB)) Deplorable Basterd brigade #47
Dragynn is online now   Reply With Quote
Old 02-14-2018, 09:14 PM   #40
virgil cole
Curio & Relic
 
AKaholic #: 102797
Join Date: Jun 2010
Location: two egg
Posts: 4,450
Default

I use Japanese Water Stone from Norton Waterstones . I also use a diamond impregnated blade sharpener to touch things up when needed . There are many ways to sharpen a blade . Most people press the blade against the sharpener too hard . The secret to blade sharpening is to use a light touch. A very light stroke . T
virgil cole is online now   Reply With Quote
Old 02-14-2018, 09:25 PM   #41
virgil cole
Curio & Relic
 
AKaholic #: 102797
Join Date: Jun 2010
Location: two egg
Posts: 4,450
Default

The Lionsteel M-4 has a hollow grind . I don't like knives with " hollow grinds " .
virgil cole is online now   Reply With Quote
Old 02-14-2018, 10:24 PM   #42
Rev06
Curio & Relic
 
AKaholic #: 185972
Join Date: Apr 2016
Location: In the bitter cold
Posts: 3,462
Default

Stokes what are using to sharpen your Lionsteel in 390? I like that blade and want to try that type of steel but have heard that it will require 2-3 times longer to sharpen it. That's a using stones etc not just a strop. I could handle it ok if I knew that I just need to keep it stropped up.

I have a couple w CPM 3V and I like it a lot, but they do take longer to get sharp again after quite a bit of use. That's comparing it to say 1095, which gets dull pretty fast but can be sharpened on a rock.
__________________
Rev
Rev06 is online now   Reply With Quote
Old 02-17-2018, 09:47 PM   #43
jstokes1
Veteran Member
 
AKaholic #: 169998
Join Date: Jun 2013
Location: Baton rouge, United states
Posts: 1,238
Default

Quote:
Originally Posted by virgil cole View Post
The Lionsteel M-4 has a hollow grind . I don't like knives with " hollow grinds " .
What? no it doesn't. It has a saber grind, pretty much a full flat grind.
jstokes1 is online now   Reply With Quote
Old 02-17-2018, 09:48 PM   #44
jstokes1
Veteran Member
 
AKaholic #: 169998
Join Date: Jun 2013
Location: Baton rouge, United states
Posts: 1,238
Default

Quote:
Originally Posted by Rev06 View Post
Stokes what are using to sharpen your Lionsteel in 390? I like that blade and want to try that type of steel but have heard that it will require 2-3 times longer to sharpen it. That's a using stones etc not just a strop. I could handle it ok if I knew that I just need to keep it stropped up.

I have a couple w CPM 3V and I like it a lot, but they do take longer to get sharp again after quite a bit of use. That's comparing it to say 1095, which gets dull pretty fast but can be sharpened on a rock.
I use some diamond stones and a hand held strop (for the lasky system, I just free hand it). I have two knives in M-390, this lionsteel and a Maxace folder. It is quite difficult to raise a burr with conventional stones.
jstokes1 is online now   Reply With Quote
Old 02-18-2018, 12:59 AM   #45
virgil cole
Curio & Relic
 
AKaholic #: 102797
Join Date: Jun 2010
Location: two egg
Posts: 4,450
Default

Quote:
Originally Posted by jstokes1 View Post
What? no it doesn't. It has a saber grind, pretty much a full flat grind.
According to the knife specifications listed the type of grind was " Hollow " !
virgil cole is online now   Reply With Quote
Old 02-22-2018, 06:50 PM   #46
Dragynn
Curio & Relic
Contributor
 
Dragynn's Avatar
 
AKaholic #: 170546
Join Date: Aug 2013
Location: Eriador
Posts: 4,880
Default

Quote:
Originally Posted by Rev06 View Post
That's comparing it to say 1095, which gets dull pretty fast but can be sharpened on a rock.
And that's my experience with 1095 as well, same way with my 5160's, AUS-8 blades and my Buck 420HC's, which leads me to wonder if they aren't better choices in a true survival situation?
__________________
((DB)) Deplorable Basterd brigade #47
Dragynn is online now   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
©1998-2018 The AK FIles