![]() |
![]() |
#1 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
So fires on pull and release. Also say u don't want the shot to go off on the release slide up the safety and will reset the trigger. It's just pull and release no selectable between this and straight semi auto.
|
![]() |
![]() |
![]() |
#2 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
Can't seem to get the video loaded might have to upload to YouTube and drop a link.
|
![]() |
![]() |
![]() |
#3 |
Member
AKaholic #: 175516 Join Date: May 2014
Location: Washington
Posts: 270
|
![]()
i have lots of interest, to bad WA has the dumbest definition of "machine gun" in the world....and a total ban on machine guns.
|
![]() |
![]() |
![]() |
#4 |
Ummm Hi?
AKaholic #: 174464 Join Date: Mar 2014
Location: Graham, WA
Posts: 321
|
![]()
Operating the safety while holding the trigger down on a he AK is a bit more of a hassle than on an AR15. Honestly these just come across as gimmicks. If you want to fake make a machine gun just get a slide fire. I feel dirty suggesting a slide fire.
|
![]() |
![]() |
![]() |
#5 |
The Mouth of Sauron
AKaholic #: 181719 Join Date: Aug 2015
Location: Country Club El Paso, TX Area
Posts: 4,542
|
![]()
I might pick one up for my MP5 clone and PTR91.
__________________
FUCK CANCER. Nalioth is SKYNET US Army Retired 2nd ID 1st CAV 1st Armordildo |
![]() |
![]() |
![]() |
#6 |
Curio & Relic
AKaholic #: 177348 Join Date: Oct 2014
Location: IL
Posts: 3,843
|
![]()
Some of the ones I was looking at for the AR have semi auto mode and binary mode.
I would have no interest in one that was only binary. You also have to make sure you get one of the ones that won't outrun the bolt carrier and cause reset issues.
__________________
Islam Delenda Est. |
![]() |
![]() |
![]() |
#7 |
(((DB)))
AKaholic #: 176712 Join Date: Aug 2014
Location: Gaytown, Texas
Posts: 2,258
|
![]()
Here's a threads with vids
http://www.akfiles.com/forums/showthread.php?t=287535 http://www.akfiles.com/forums/showth...Binary+trigger http://www.akfiles.com/forums/showth...Binary+trigger
__________________
![]() (((DB #28))) Crosstown ![]() |
![]() |
![]() |
![]() |
#8 |
Curio & Relic
AKaholic #: 177348 Join Date: Oct 2014
Location: IL
Posts: 3,843
|
![]()
ARGHHH !!!...a grip safety ? Really ? Burn in fucking hell lol. That's one thing I can't stand in firearms. Although the rest of that digital trigger looks cool.
__________________
Islam Delenda Est. |
![]() |
![]() |
![]() |
#9 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]() |
![]() |
![]() |
![]() |
#10 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
So i have 2 of these made as of right now. They work flawlessly 400 rounds through one of them. U have to use a f/A safety to make it work
|
![]() |
![]() |
![]() |
#11 |
SHTF Specialist
AKaholic #: 173989 Join Date: Feb 2014
Location: Reading, PA
Posts: 1,712
|
![]()
im in, looks awesome
|
![]() |
![]() |
![]() |
#12 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
If I get a lot of people intrested ill start making them. I have to find a way to cut down the production time. Took a lil over 4 hours just to make one and fine tune it
|
![]() |
![]() |
![]() |
#13 |
Member
AKaholic #: 185245 Join Date: Mar 2016
Location: Sterling Heights, MI
Posts: 261
|
![]()
Estimated price range?
__________________
Mopar or no car! |
![]() |
![]() |
![]() |
#14 |
Senior Member
AKaholic #: 184541 Join Date: Feb 2016
Location: Missouri Ozarks
Posts: 685
|
![]()
I cant view your video... Cuz my lil cell phone don't work right.
However, if this is for AKs, and will work in any AK, I'd be interested. I've tried bumpfiring just for fun, but my technique sucks. I tried the $40 bumpfire device popular here a while back, could never get it to work on ANY AK, mine or others'. Anybody wanna buy or trade for a gen 1 & a gen2 device? Did I mention my technique sucks hind tit? I prefer to hit my target, and bump firing is for me a novelty. However... If your device WORKS in any AK, I'd give it a go. Mebbe send one to Rob Ski for eval? Save everyone a lot of trouble.
__________________
Shenanigans are afoot. Situational awareness and the escalation of force are your friends. See you boys at the brewery tomorrow. |
![]() |
![]() |
![]() |
#15 |
Senior Member
AKaholic #: 170872 Join Date: Aug 2013
Location: NC
Posts: 673
|
![]()
I would be interested in a binary trigger for the AK.
|
![]() |
![]() |
![]() |
#16 |
Member
AKaholic #: 191191 Join Date: Jan 2017
Location: Northern IN
Posts: 449
|
![]()
It's not hard to make a setup, grab two disconnectors, profile them down as thin as you can before the spring pockets break thru, leave the FA tail on one, cut it off the other, trim a little from the tip of the tail-less one, or put a bit of weld under the front. Add a little clearance inside the trigger, make a pair of spring pockets. Done. Have fun with all that hammer follow.
The problem I had with the bair arms setup is, well hammer follow. After I addressed that, with new springs. I can get it to work 100% of the time. Prefer it to the binary setup I have. Binary is in an underfolder, bump fire grip in a fixed stock gun |
![]() |
![]() |
![]() |
#17 | |
Ruler of Ramnation
Contributor
AKaholic #: 182786 Join Date: Oct 2015
Location: real close to the Buffalo
Posts: 4,539
|
![]()
Seems you can't find nor operate the edit link either. Just an observation.
__________________
Misfit magazine garage repair guroo Quote:
DEFCON 2.2 |
|
![]() |
![]() |
![]() |
#18 |
Curio & Relic
AKaholic #: 172152 Join Date: Nov 2013
Location: Springfield, IL
Posts: 4,355
|
![]()
Whats the trigger slap like?
|
![]() |
![]() |
![]() |
#19 |
Member
AKaholic #: 190764 Join Date: Dec 2016
Location: The Republic of Texas
Posts: 183
|
![]()
Depending on the price, I would take a few of them.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#20 |
Veteran Member
AKaholic #: 158002 Join Date: Jul 2011
Location: Texas
Posts: 1,156
|
![]()
Tagged for interest. Definitely some interest here for a binary trigger for an AK.
|
![]() |
![]() |
![]() |
#21 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
Lil to no trigger slap at all
|
![]() |
![]() |
![]() |
#22 |
Senior Member
AKaholic #: 193447 Join Date: Jul 2017
Location: Killbuck Ohio
Posts: 905
|
![]()
If you ever fired a Bumpski aluminum slide fire on an AK,that feeling would go away.The Fosteck Bumpski is unbelievable,coming from one who owned 80 full autosin the late 90's,including 3 Chicom akm underfolders.
|
![]() |
![]() |
![]() |
#23 |
Curio & Relic
AKaholic #: 141863 Join Date: Sep 2010
Location: Kansas City
Posts: 2,812
|
![]()
next to free red-neck AK binary. This video isn't me and I have NOT tried it. Interesting, though.
|
![]() |
![]() |
![]() |
#24 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
Looks very safe having a piece of pop can floating around in your action.
|
![]() |
![]() |
![]() |
#25 |
Member
AKaholic #: 191191 Join Date: Jan 2017
Location: Northern IN
Posts: 449
|
![]()
Not exactly 'floating around in the action, just shimmed under the disconnector. Other end pinched between trigger finger, then the receiver and the disconnector. Technically though. THAT ^^^ is a MG, no back-up disconnector.
I'm going to have to take a picture of my setup sometime |
![]() |
![]() |
![]() |
#26 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
So i have triggers made off the G2 triggers 150 shipped if any one is intrested.
|
![]() |
![]() |
![]() |
#27 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
You will have to use your own hammer and you need a full auto safety selector. I would also suggest a hi power hammer spring. I have 1000 rounds now on mine. It's sitting in a slr101 in 7.62x39. Not sure if theres any issues working in a 74.
|
![]() |
![]() |
![]() |
#28 |
SHTF Specialist
AKaholic #: 173989 Join Date: Feb 2014
Location: Reading, PA
Posts: 1,712
|
![]() |
![]() |
![]() |
![]() |
#29 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
Not yet sent in the paper work to them and patent office.
|
![]() |
![]() |
![]() |
#30 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
Also playing on CAD i made a full drop in but price will be much more and need to have a shop make me up so prototypes
|
![]() |
![]() |
![]() |
#31 |
SHTF Specialist
AKaholic #: 173989 Join Date: Feb 2014
Location: Reading, PA
Posts: 1,712
|
![]()
im in pending ATF approval
|
![]() |
![]() |
![]() |
#32 |
Senior Member
AKaholic #: 170872 Join Date: Aug 2013
Location: NC
Posts: 673
|
![]()
I'm in for one once it is approved by ATF. Maybe more if they end up functioning well.
|
![]() |
![]() |
![]() |
#33 |
Member
AKaholic #: 176063 Join Date: Jul 2014
Location: Jacksonville Florida
Posts: 283
|
![]()
Any pics of this?
|
![]() |
![]() |
![]() |
#34 |
Member
AKaholic #: 184883 Join Date: Feb 2016
Location: Chicago Illinois
Posts: 36
|
![]()
I posted a video. No pics of internals yet
|
![]() |
![]() |
![]() |
#35 |
Senior Member
AKaholic #: 170744 Join Date: Aug 2013
Location: Montgomery il
Posts: 511
|
![]()
tag
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
|
|