HOW TO REGISTER AND GET APPROVED FOR THE FORUM

Holescreek · 07-16-2017, 09:44 PM

A friend stopped by the shop this afternoon while I was working on the flash suppressor mount for my brand new Rugged Surge Suppressor. I've had it a couple weeks but hadn't had time to go shooting so I suggested we head to the range to test it out. Mark owns a few guns and I assumed that he'd shot them before. I was wrong. Turns out he'd only shot a .22 at close range up till today. All I had was my cell phone to take a couple of photos and a short video clip of his first shot. I pasted them together to make a very short video of his cherry popping.

bounce19712 · 07-16-2017, 09:53 PM

big Breasts post. this post equals them...almost.

notasheeple · 07-16-2017, 10:05 PM

That's very quiet. Handload?

Holescreek · 07-16-2017, 10:20 PM

The loads are my standard 174gr SMK over 44 gr of Varget hand loads. I don't own a chronograph so don't have an idea of speed but at 44.6grains the bullets start getting squirrley.

I was very surprised at the sound myself. These were literally the first rounds fired through the Rugged Surge and it sounded like a .22 to me while shooting it.

Hilljack · 07-16-2017, 11:08 PM

Very nice. It is amazing how much sound and recoil they take out of a rifle.

John_Galt · 07-20-2017, 07:43 PM

Holescreek, you've always done great work. I always look forward to seeing your projects.

Holescreek · 07-23-2017, 01:34 AM

I just had to try the new can out on my PSG1ish Cetme. These 5 shots were kind of rushed but still managed to keep them under an inch at 100 yards.

cabinarms · 07-23-2017, 01:27 PM

NOTE: on CETME for suppression. I ran a HK21 locking pc on my PTR 308/7.62 rifle. this made a huge difference with the silencer. I dont remember what degree it was though. but it slows it down just enough where it is very quiet. prior to that it was obnoxious, ear muff mandatory using the silencer.

Holescreek · 07-23-2017, 02:22 PM

I already had a 40 degree LP in this one since the barrel is 24".

newtothegame · 02-04-2018, 11:13 PM

I want to kinda have my M38 threaded lol

notasheeple · 02-04-2018, 11:21 PM

OP, beautiful Cetme build.

What stock is on the Mosin?

07-16-2017, 09:44 PM	#1
Holescreek Senior Member AKaholic #: 124983 Join Date: Aug 2010 Location: Ohio Posts: 737	Supressed Mosin...Finally! A friend stopped by the shop this afternoon while I was working on the flash suppressor mount for my brand new Rugged Surge Suppressor. I've had it a couple weeks but hadn't had time to go shooting so I suggested we head to the range to test it out. Mark owns a few guns and I assumed that he'd shot them before. I was wrong. Turns out he'd only shot a .22 at close range up till today. All I had was my cell phone to take a couple of photos and a short video clip of his first shot. I pasted them together to make a very short video of his cherry popping. __________________ ____________________________________ Turning perfectly good metal and wood into useless chips an dust since 1981.

07-16-2017, 09:53 PM	#2
bounce19712 Curio & Relic AKaholic #: 8142 Join Date: Apr 2007 Location: Northern AZ Posts: 5,664	big Breasts post. this post equals them...almost. __________________ Your revolution is over, Mr. Lebowski. Condolences. The bums lost. My advice is to do what your parents did; get a job, sir. The bums will always lose. Do you hear me, Lebowski? The bums will always lose! temp ban award winner: ka64 Posting a .gif of a Male Motor boating a woman's ass/vag from behind. No true nudity due to camera angle, still a sex act in the general forums...

07-16-2017, 10:20 PM	#4
Holescreek Senior Member AKaholic #: 124983 Join Date: Aug 2010 Location: Ohio Posts: 737	The loads are my standard 174gr SMK over 44 gr of Varget hand loads. I don't own a chronograph so don't have an idea of speed but at 44.6grains the bullets start getting squirrley. I was very surprised at the sound myself. These were literally the first rounds fired through the Rugged Surge and it sounded like a .22 to me while shooting it. __________________ ____________________________________ Turning perfectly good metal and wood into useless chips an dust since 1981.

07-16-2017, 11:08 PM	#5
Hilljack Veteran Member Contributor AKaholic #: 29 Join Date: Nov 2003 Location: Albuquerque, NM Posts: 1,455	Very nice. It is amazing how much sound and recoil they take out of a rifle. __________________ http://dragunov.us/

07-20-2017, 07:43 PM	#6
John_Galt Curios & Relics AKaholic #: 164550 Join Date: Sep 2012 Location: Maine, USA Posts: 318	Holescreek, you've always done great work. I always look forward to seeing your projects. __________________ Blue lodge since 2008, Scottish Rite since 2010

07-16-2017, 10:05 PM	#3
notasheeple Senior Member AKaholic #: 186464 Join Date: May 2016 Location: Louisiana Posts: 901	That's very quiet. Handload?

07-23-2017, 01:34 AM	#7
Holescreek Senior Member AKaholic #: 124983 Join Date: Aug 2010 Location: Ohio Posts: 737	I just had to try the new can out on my PSG1ish Cetme. These 5 shots were kind of rushed but still managed to keep them under an inch at 100 yards. __________________ ____________________________________ Turning perfectly good metal and wood into useless chips an dust since 1981.

07-23-2017, 01:27 PM	#8
cabinarms Veteran Member Contributor AKaholic #: 173472 Join Date: Jan 2014 Location: Weston, WI Posts: 1,340	NOTE: on CETME for suppression. I ran a HK21 locking pc on my PTR 308/7.62 rifle. this made a huge difference with the silencer. I dont remember what degree it was though. but it slows it down just enough where it is very quiet. prior to that it was obnoxious, ear muff mandatory using the silencer. __________________ 14X1 LH barrel threading

07-23-2017, 02:22 PM	#9
Holescreek Senior Member AKaholic #: 124983 Join Date: Aug 2010 Location: Ohio Posts: 737	I already had a 40 degree LP in this one since the barrel is 24". __________________ ____________________________________ Turning perfectly good metal and wood into useless chips an dust since 1981.

02-04-2018, 11:21 PM	#11
notasheeple Senior Member AKaholic #: 186464 Join Date: May 2016 Location: Louisiana Posts: 901	OP, beautiful Cetme build. What stock is on the Mosin?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)