Go Back   The AK Files Forums > General Forums > Gear & Accessories

Notices

Reply
 
Thread Tools
Old 02-10-2018, 12:54 PM   #36
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by r0adki111 View Post
Is the B-20 discontinued and now replaced by the B-20u? I'm really wanting a B-20. Thanks.
Yes. As well as b-10 and oldgen b-11.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-10-2018, 12:56 PM   #37
r0adki111
Member
 
AKaholic #: 191481
Join Date: Feb 2017
Location: Backwoods USA
Posts: 238
Default

Quote:
Originally Posted by Ivan The Bear View Post
Yes. As well as b-10 and oldgen b-11.
That's too bad. You don't happen to have one laying around do ya?
r0adki111 is offline   Reply With Quote
Old 02-10-2018, 12:58 PM   #38
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by r0adki111 View Post
That's too bad. You don't happen to have one laying around do ya?
They were discontinued 2 years ago, so the only ones remaining are in Zenitco museum.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-10-2018, 12:59 PM   #39
r0adki111
Member
 
AKaholic #: 191481
Join Date: Feb 2017
Location: Backwoods USA
Posts: 238
Default

Ok. Thank you.
r0adki111 is offline   Reply With Quote
Old 02-13-2018, 01:30 AM   #40
Desinori
Member
 
AKaholic #: 190941
Join Date: Dec 2016
Location: Garden Grove, CA
Posts: 91
Default

Is there a way to modify the B33 on the B20U RPK lower handguards?

I know the RPK/Vepr is thicker around where the rear sight base wraps around the heavy barrel, but it looks like it will only affect the front screws on the arm of the B33 - perhaps there's enough meat on the arm to mill down?

Thanks,
Desinori is offline   Reply With Quote
Old 02-13-2018, 03:34 AM   #41
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by Desinori View Post
Is there a way to modify the B33 on the B20U RPK lower handguards?

I know the RPK/Vepr is thicker around where the rear sight base wraps around the heavy barrel, but it looks like it will only affect the front screws on the arm of the B33 - perhaps there's enough meat on the arm to mill down?

Thanks,
I tried to fit b-33 on saiga 308-1 with match barrel, the same thikness as on RPK. After all measurments i desided that grinding so much material from b-33 arms will make it unreliable. But you can still try.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-14-2018, 04:13 PM   #42
WickedSick83
Member
 
AKaholic #: 194658
Join Date: Nov 2017
Location: Somewhere, Oregon
Posts: 50
Default

Just want to say how pleased I was working with Ivan Tactical. The prices were great and way cheaper than Legion. Only downer is that it took a touch over 1 month to arrive, but I blame customs for that. All in all, great service, was quick to answer any questions I had, and the products arrived mint in bags. They even threw in a hand written thank you note wishing me a Merry Christmas. These guys are my new go to for Zenitco parts.
WickedSick83 is offline   Reply With Quote
Old 02-14-2018, 04:19 PM   #43
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by WickedSick83 View Post
Just want to say how pleased I was working with Ivan Tactical. The prices were great and way cheaper than Legion. Only downer is that it took a touch over 1 month to arrive, but I blame customs for that. All in all, great service, was quick to answer any questions I had, and the products arrived mint in bags. They even threw in a hand written thank you note wishing me a Merry Christmas. These guys are my new go to for Zenitco parts.
Thanks! Waiting over 1 month is way too long, just send us a message and weíll claim postal service. Most times it helps to speed up the delivery.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-17-2018, 06:27 AM   #44
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Just a few more info on Zenitco desert tan line.
Black accessories are known for being easily scratched. Desert tan accessories are coated with hard ceramic, the coating is VERY rough and heavy duty. More than that, this coating can be a perfect base for applying paint on it. Price is the same as for black ones.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-20-2018, 03:19 PM   #45
Fboutsis13
Member
 
AKaholic #: 182474
Join Date: Oct 2015
Location: Palm Harbor, Florida
Posts: 115
Default

I ordered from you and got my zenitco rail system for my 105 clone in 2 weeks!!!...it was fast and easy....is there any time frame when the long b-30 rails will be like the b-10U??
Fboutsis13 is offline   Reply With Quote
Old 02-20-2018, 03:26 PM   #46
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by Fboutsis13 View Post
I ordered from you and got my zenitco rail system for my 105 clone in 2 weeks!!!...it was fast and easy....is there any time frame when the long b-30 rails will be like the b-10U??
Thanks!
They told us that new pt-1 and b-30u will be released in 2018. Zenitco is now loaded with Oko project, so new accessories are delayed.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-20-2018, 03:46 PM   #47
Fboutsis13
Member
 
AKaholic #: 182474
Join Date: Oct 2015
Location: Palm Harbor, Florida
Posts: 115
Default

ok great....i'm building another 105 clone so i'll just hold out on the lower rail for when it's released...thanks again!!!.....and the b-33 dust cover will still wotrk with it right?
Fboutsis13 is offline   Reply With Quote
Old 02-20-2018, 05:41 PM   #48
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by Fboutsis13 View Post
ok great....i'm building another 105 clone so i'll just hold out on the lower rail for when it's released...thanks again!!!.....and the b-33 dust cover will still wotrk with it right?
Yes, hope to get some of them from the factory next week.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-20-2018, 06:03 PM   #49
ah-k
Member
 
AKaholic #: 168741
Join Date: Apr 2013
Location: TN
Posts: 278
Default

Can't wait for the B-30u! Only thing that could be better is if it was keymod!
__________________
Super-Lurker

"I'd rather see a rifle "Magpul-fucked" than "Tapco-fucked". - Flankenstein
ah-k is online now   Reply With Quote
Old 02-21-2018, 03:20 AM   #50
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by ah-k View Post
Can't wait for the B-30u! Only thing that could be better is if it was keymod!
Alfa arms will have something like that soon.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-26-2018, 06:19 AM   #51
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Found some guy on youtube trying to destroy 2p Klesh light. Maybe you’ll be interested:
https://youtu.be/CCWZ2Ph-AW0
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 02-28-2018, 09:46 AM   #52
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Today I'll show you guys a couple of less known ZenitCo products you can be interested in.
First: Perst-1 IR laser designator. For thouse who want to do some NVG shooting, but don't want to spend lots of money on laser.
Perst-1 is IR laser designator with 3 mWt power. It's less then 4mWt in Perst-4 and 3 or PEQ-15, but beam can still reach 900 yards. Laser can work with any ZenitCo remote switch.
There is also red laser version of Perst-1.
The main thing is the price - 160 usd for milspec IR designator.


Second - B-5 rail. Made for those, who want to use iron sights together with dust cover mounted red dot or scope. The hole in the base is big enough to use irons.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear

Last edited by Ivan The Bear; 03-19-2018 at 05:07 AM.
Ivan The Bear is online now   Reply With Quote
Old 03-19-2018, 05:04 AM   #53
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Due to rising interest towards Perst-3 illuminator, here is a brief specs comparison with dbal a3 (civilian), peq-15 and Perst-3.
Max Visible laser power:
Dbal - 5 mW
Peq - 4 mW
Perst - 4 mW
Max IR laser power:
Dbal - 0.7 mW
Peq - 25 mW
Perst - 20 mW
Max IR illuminator power:
Dbal - 4 mW
Peq - 30 mW
Perst - 500 mW
Adjustable IR illuminator angle:
Dbal - yes
Peq - yes
Perst - yes
Pressure switch:
Dbal - yes
Peq - yes
Perst - yes, with power adjustment straight from the switch
Weight
Dbal - 8 oz, aluminum
Peq - 7.5 oz, plastic
Perst - 11.8 oz, aluminum
Msrp
Dbal - 1425 usd
Peq - 1424 usd
Perst - 1275 usd
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 03-19-2018, 07:41 AM   #54
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Some info on legal aspects of owning IR lasers in US from The Firearm Blog:
http://www.thefirearmblog.com/blog/2...r-regulations/
Briefly:
1. ITAR regulates exporting devices from US, but not importing into.
2. Most restrictions are corporate policies, not laws.
3. US based business can’t sell you IR laser with power more then 0.7 mW, but you can legally own it or buy second hand. We are not US based, so we don’t have to obey FDA regulations on direct sales of IR lasers.

State regulations can vary.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 03-24-2018, 07:44 AM   #55
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Some less known laser and IR stuff from Zenitco:
New generation 2PS+laser with green laser designator. MSRP 325$. Features new body design and green laser with visible beam (at night):


2P-IK IR illuminator. Budget solution for basic IR illumination. MSRP 145$. The only cons is that it lacks on/off indicator:

2IKS+ laser. Fully IR illuminator with laser designator. MSRP 275$ IR laser is more powerfull then in Perst-1IK and lenses are higher quality:


2IKS+ laser operates at full power. Weather conditions - light rain.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear

Last edited by Ivan The Bear; 03-24-2018 at 08:21 AM.
Ivan The Bear is online now   Reply With Quote
Old 03-24-2018, 08:10 AM   #56
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Perst-4 and PVS-14 video
In this video you can see how power adjustment works. Perst-4 has buttons on the unit, power of Perst-3 can also be adjusted directly from the pressure switch.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 04-28-2018, 07:31 AM   #57
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

New product from Zenitco will soon hit the stores. B-6 QD base for all Zenitco forward grips. Replaces standard Picatinny base.

__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 04-29-2018, 08:52 PM   #58
otacon237
New Member
 
AKaholic #: 196460
Join Date: Apr 2018
Location: Jacksonville, FL
Posts: 19
Default

do you import Akademia products as well? i'm curious how well their Zmey holds a zero. and also if the Darkness is really as effective as they say, it almost looks like a mini suppressor
otacon237 is offline   Reply With Quote
Old 04-30-2018, 03:26 AM   #59
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by otacon237 View Post
do you import Akademia products as well? i'm curious how well their Zmey holds a zero. and also if the Darkness is really as effective as they say, it almost looks like a mini suppressor
We donít work with them due to quality issues. Akademia is actually rebranded Red Heat. Quality control is poor.
Tactica Tula originally makes Darkness devices. They are effective in flash suppression. Sound is less loud then with muzzle brake only, about 15 dbs less.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 04-30-2018, 03:32 PM   #60
voron
Curio & Relic
 
voron's Avatar
 
AKaholic #: 174098
Join Date: Mar 2014
Location: Nordland
Posts: 2,483
Default

guys, from personal experience, the GOOSE flashlight adapter is tits. It hides the light so well, it actually feels like it was a part of the rifle itself
__________________
Кто не скачет- это Вооружённые Силы Новороссии
А кто скачет тот полный пидарас которого наебали свои-же лидеры.

BAN SIG 2017

voron is offline   Reply With Quote
Old 05-06-2018, 10:19 PM   #61
futureofwar
Member
 
AKaholic #: 186224
Join Date: May 2016
Location: Kokomo, IN
Posts: 47
Default

Does the B-11 lower rail fit the SAM7K with no issues?
futureofwar is online now   Reply With Quote
Old 05-07-2018, 04:49 AM   #62
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by futureofwar View Post
Does the B-11 lower rail fit the SAM7K with no issues?
As far as i know, sam7k has milled receiver. Zenitco parts fit only stamped receivers without mods. Fitting milled receiver is possible, but will require filing the handguard.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 05-08-2018, 11:24 AM   #63
otacon237
New Member
 
AKaholic #: 196460
Join Date: Apr 2018
Location: Jacksonville, FL
Posts: 19
Default

Hi Ivan, any plans to carry Alfa Arms products and do you know if they're a reputable brand?
otacon237 is offline   Reply With Quote
Old 05-08-2018, 11:30 AM   #64
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by otacon237 View Post
Hi Ivan, any plans to carry Alfa Arms products and do you know if they're a reputable brand?
Yes! They produce new line of accessories this year and we will stock them.
All handguards will be much lighter then previous gen. There will also be keymod variants.
We’re now working both with Zenitco and Alfa to make new Alfa handguards compatible with B-33 receiver cover.
Zenitco products are still better quality then Alfa. Looks like Alfa accessories are overpriced in USA. For example EFA handguard for Vepr-12 MSRP is 100 usd. Retail price in USA is something about 150.
Some prototypes from Alfa:
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear

Last edited by Ivan The Bear; 05-08-2018 at 11:36 AM.
Ivan The Bear is online now   Reply With Quote
Old 05-09-2018, 01:54 AM   #65
Fboutsis13
Member
 
AKaholic #: 182474
Join Date: Oct 2015
Location: Palm Harbor, Florida
Posts: 115
Default

Hey my good man....any more news on the B-30U edition?....is it still in the works or is it not coming out anytime soon??
Fboutsis13 is offline   Reply With Quote
Old 05-09-2018, 03:09 AM   #66
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by Fboutsis13 View Post
Hey my good man....any more news on the B-30U edition?....is it still in the works or is it not coming out anytime soon??
They say that itís in production. But they have been saying it for two years already.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 05-09-2018, 10:40 AM   #67
Fboutsis13
Member
 
AKaholic #: 182474
Join Date: Oct 2015
Location: Palm Harbor, Florida
Posts: 115
Default

Quote:
Originally Posted by Ivan The Bear View Post
They say that itís in production. But they have been saying it for two years already.
hahahahaha.....you sure they're Russian and not a fellow Greek like me?....we work for 3 hours then nap for 5
Fboutsis13 is offline   Reply With Quote
Old 05-09-2018, 11:17 AM   #68
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default

Quote:
Originally Posted by Fboutsis13 View Post
hahahahaha.....you sure they're Russian and not a fellow Greek like me?....we work for 3 hours then nap for 5
Maybe
I think the main issue is Oko project. It requires all resources.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Old 05-11-2018, 02:43 PM   #69
otacon237
New Member
 
AKaholic #: 196460
Join Date: Apr 2018
Location: Jacksonville, FL
Posts: 19
Default

Quote:
Originally Posted by Ivan The Bear View Post
Yes! They produce new line of accessories this year and we will stock them.
All handguards will be much lighter then previous gen. There will also be keymod variants.
Weíre now working both with Zenitco and Alfa to make new Alfa handguards compatible with B-33 receiver cover.
Zenitco products are still better quality then Alfa. Looks like Alfa accessories are overpriced in USA. For example EFA handguard for Vepr-12 MSRP is 100 usd. Retail price in USA is something about 150.
Some prototypes from Alfa:
thanks for the update! yes, they are quite expensive here
otacon237 is offline   Reply With Quote
Old 05-22-2018, 12:28 PM   #70
Ivan The Bear
Member
Vendor
 
Ivan The Bear's Avatar
 
AKaholic #: 194920
Join Date: Dec 2017
Location: Russia, Oryol ZenitCo AK parts official international dealer.
Posts: 109
Default



I’ll just leave it here. Available soon from our store exclusively.
Mlok version is coming soon too.
__________________
Official Russian based ZenitCo AK parts and SPOSN gear international dealer. Paypal checkout accepted. Lowest prices on the market. New supply every week.
https://ivantactical.com
Contact: sales@ivantactical.com or PM.
Instagram: @ivan__the__bear
Ivan The Bear is online now   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
©1998-2018 The AK FIles