WTS: Bulgarian AK74 wood stock set refinished in ebony /flat spar urethane

BROBS · 06-02-2012, 04:47 PM

PICS ON RIFLE:

as the title states.

I removed the old finish.. also removed as many dings in the stocks as possible. the only real dings that show are on the lower handguard.

I then stained the stock with outdoor "ebony" stain... but didn't go overly dark with it.. just darkened up the grain (almost looks stained with india ink).
I finished and sealed it with flat spar urethane so as not to get the "wet" look... the lower handguard is slightly shinier than the other two pieces from being polished by use/shooting.

I blended the pieces of wood into the rifle.. so the edges don't fit "blockish" like an unfitted set.

the wood has pretty decent "tiger" look IMO and it was always a nice looking set. I have a soviet rifle now with soviet wood on the way... so no real use for this set anymore.

looking to get $40 shipped SUPER AKFILES FINAL REDUCTION! for it.. I spent a lot of time and effort on it as this was a set I was planning on keeping on a rifle that I no longer have.

thanks for looking!

BROBS · 06-02-2012, 08:24 PM

how bout 60 shipped? the stock and materials alone was damn near that.

BROBS · 06-04-2012, 09:12 PM

50 bucks shipped to you or they go back in my storage cabinet

BROBS · 06-05-2012, 08:19 PM

ok jeez final AKFILES reduction you're breakin my balls here!

$40 shipped

BROBS · 06-06-2012, 05:21 PM

nobody needs this? are my pics really bad?

it looks damn good on the rifle.

here it is on my old 74. I have a 47 now so this isn't the "correct" stock for it.

zfields · 06-06-2012, 05:51 PM

Great looking set, wish I had a fixed trunion rifle to put them on! Free bump

WTSGDYBBR · 06-06-2012, 05:55 PM

BROBS was this the minwax stuff ? I tried to use it and it turned out like crap and just didn't waste my time on it. Good job your looks nice.

keith524 · 06-06-2012, 05:57 PM

i will take them!!!

BROBS · 06-06-2012, 06:23 PM

Quote:

Originally Posted by WTSGDYBBR

BROBS was this the minwax stuff ? I tried to use it and it turned out like crap and just didn't waste my time on it. Good job your looks nice.

stain was minwax outdoor "ebony"
flat spar urethane came in a black spraycan and was a different brand. I must have used the whole can I can't seem to find it.

PM sent to Keith

crowak2 · 06-06-2012, 08:22 PM

I will take it if deal falls through.

BROBS · 06-06-2012, 09:33 PM

ok.. crowak is 2nd in line.

as of now it's SPF.

407ForRent · 06-06-2012, 11:50 PM

3rds

06-02-2012, 04:47 PM	#1
BROBS guy who likes stuff AKaholic #: 158103 Join Date: Aug 2011 Location: in a sod chalet, IA Posts: 496	WTS: Bulgarian AK74 wood stock set refinished in ebony /flat spar urethane PICS ON RIFLE: as the title states. I removed the old finish.. also removed as many dings in the stocks as possible. the only real dings that show are on the lower handguard. I then stained the stock with outdoor "ebony" stain... but didn't go overly dark with it.. just darkened up the grain (almost looks stained with india ink). I finished and sealed it with flat spar urethane so as not to get the "wet" look... the lower handguard is slightly shinier than the other two pieces from being polished by use/shooting. I blended the pieces of wood into the rifle.. so the edges don't fit "blockish" like an unfitted set. the wood has pretty decent "tiger" look IMO and it was always a nice looking set. I have a soviet rifle now with soviet wood on the way... so no real use for this set anymore. looking to get $40 shipped SUPER AKFILES FINAL REDUCTION! for it.. I spent a lot of time and effort on it as this was a set I was planning on keeping on a rifle that I no longer have. thanks for looking! Last edited by BROBS; 06-06-2012 at 05:22 PM.

06-06-2012, 05:51 PM	#6
zfields Member AKaholic #: 146539 Join Date: Sep 2010 Location: San Marcos, TX Posts: 163	Great looking set, wish I had a fixed trunion rifle to put them on! Free bump __________________ www.sandstormcustomrifleslings.com

06-02-2012, 08:24 PM	#2
BROBS guy who likes stuff AKaholic #: 158103 Join Date: Aug 2011 Location: in a sod chalet, IA Posts: 496	how bout 60 shipped? the stock and materials alone was damn near that.

06-04-2012, 09:12 PM	#3
BROBS guy who likes stuff AKaholic #: 158103 Join Date: Aug 2011 Location: in a sod chalet, IA Posts: 496	50 bucks shipped to you or they go back in my storage cabinet

06-05-2012, 08:19 PM	#4
BROBS guy who likes stuff AKaholic #: 158103 Join Date: Aug 2011 Location: in a sod chalet, IA Posts: 496	ok jeez final AKFILES reduction you're breakin my balls here! $40 shipped

06-06-2012, 05:21 PM	#5
BROBS guy who likes stuff AKaholic #: 158103 Join Date: Aug 2011 Location: in a sod chalet, IA Posts: 496	nobody needs this? are my pics really bad? it looks damn good on the rifle. here it is on my old 74. I have a 47 now so this isn't the "correct" stock for it.

06-06-2012, 05:55 PM	#7
WTSGDYBBR Veteran Member AKaholic #: 154838 Join Date: Oct 2010 Location: Los Angeles Posts: 1,698	BROBS was this the minwax stuff ? I tried to use it and it turned out like crap and just didn't waste my time on it. Good job your looks nice.

06-06-2012, 05:57 PM	#8
keith524 Senior Member AKaholic #: 158475 Join Date: Sep 2011 Location: USA, INDIANA Posts: 532	i will take them!!!

06-06-2012, 08:22 PM	#10
crowak2 Member Contributor AKaholic #: 8569 Join Date: Jul 2007 Posts: 350	I will take it if deal falls through.

06-06-2012, 09:33 PM	#11
BROBS guy who likes stuff AKaholic #: 158103 Join Date: Aug 2011 Location: in a sod chalet, IA Posts: 496	ok.. crowak is 2nd in line. as of now it's SPF.

06-06-2012, 11:50 PM	#12
407ForRent Senior Member AKaholic #: 156583 Join Date: Mar 2011 Location: Orlando Posts: 729	3rds

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)