The AK Files Forums

The AK Files Forums (http://www.akfiles.com/forums/index.php)
-   Marketplace (http://www.akfiles.com/forums/forumdisplay.php?f=5)
-   -   Any Cut Milled AK Receivers or RPD for Sale (http://www.akfiles.com/forums/showthread.php?t=143199)

MRBIG1 03-17-2013 08:52 PM

Any Cut Milled AK Receivers or RPD for Sale
 
demilled/ATF sliced ak milled or RPD for sale. i will buy$$

MRBIG1 03-17-2013 10:32 PM

ttt

jlh4x4 03-20-2013 06:23 PM

Apex has the demilled (Torch Cut) AK Fixed Stock Polish Receivers for $15 (10 for $100), but they have the threaded barrel and you have to get a few and hope you get one that doesn't have a cut throught the front trunnion section.
https://www.apexgunparts.com/product...oducts_id/1743
Mix and Match 10 for $100
https://www.apexgunparts.com/product...oducts_id/1794

aksatori 03-20-2013 07:38 PM

I have had good luck with these. I built three receivers out of three cut. You need front trunion obviously because the torched ones are dead.

MRBIG1 03-21-2013 05:55 PM

Quote:

Originally Posted by aksatori (Post 1384046)
I have had good luck with these. I built three receivers out of three cut. You need front trunion obviously because the torched ones are dead.

you put a stamped trunnion in a milled receiver?

aksatori 03-21-2013 07:34 PM

I have before yes. But what I was saying was you need a good front stub from a forged reciever.


All times are GMT -4. The time now is 01:46 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
©1998-2018 The AK FIles