PSL bullpup

I was just wondering if I was the only one that had thought of this. I think it would be cool if you could find a way to convert it to a bullpup without having the trigger problems that all of the AK bullpup conversions have.

I was just wondering if I was the only one that had thought of this. I think it would be cool if you could find a way to convert it to a bullpup without having the trigger problems that all of the AK bullpup conversions have.

Since the PSL is basically a giant AK action, then you'd be hard pressed to have a bullpup without running into the same problems. :(

the best answer to the trigger feel problem IMO, is on Keltec's RFB. Instead of having a long transfer bar from the trigger and putting the sear and hammer spring back where the hammer is, they put the sear and hammer spring up front with the trigger. Then the hammer spring pushes a long bar to slam the hammer forward.

http://www.akfiles.com/forums/attachment.php?attachmentid=4969

I bet you could get the bulpup AK stock set to work with the PSL. I am sure it would take considerable fiting. But mounting the scope would be another matter. Mabey it could be mounted on the rear sight base? Thx-Ace

the best answer to the trigger feel problem IMO, is on Keltec's RFB. Instead of having a long transfer bar from the trigger and putting the sear and hammer spring back where the hammer is, they put the sear and hammer spring up front with the trigger. Then the hammer spring pushes a long bar to slam the hammer forward.

http://www.akfiles.com/forums/attachment.php?attachmentid=4969
I agree the real probelm would be fitting the redesigned fire control group into a receiver that wasn't designed to house it and if you were to mount it outside the receiver it would likely be bulky and make the rifle awkward to handle. :headbang: