Trade off?

[southern boy]

i have a Romy G on nodak with Ace folder

other guy has a Milled MAK90 single tang angle cut with "dragunov" rear stock and bipod

even trade

deal or no deal?

[Vladimir2112]

i have a Romy G on nodak with Ace folder

other guy has a Milled MAK90 single tang angle cut with "dragunov" rear stock and bipod

even trade

deal or no deal?
Even trade him .you are getting the better deal

[16r40]

hmmmmm lets see, a AK parts kit cobbled on a US receiver vs. a 100 percent chinese made AK, AND a milled receiver at that.............do you really have to think about it?

[Black_Wolf]

Do it before he changes his mind.

[panzertruppe]

You're already to late,

Someone has sensed this thread and snaked you probably... If not, you're still probably to late... Man, what a trade...

panzertruppe

[Ding]

hmmmmm lets see, a AK parts kit cobbled on a US receiver vs. a 100 percent chinese made AK, AND a milled receiver at that.............do you really have to think about it?love it..:laugh_sma get that sucker,don't even blink...

[AKbarber]

Yeah, I would trade for a factory milled receivered AK. You do not see that many MAK-90s with milled receivers, at least in my area. If the Romanian gun that you have was correctly built by a well known builder and the MAK-90 was of the stamped variety, I would not be as quick to jump. By the time you'd get around to debanning it, you would have quite a bit of extra coin involved here. The milled receiver would do it for me. The stamped MAK-90s turn up quite often in my area, as they are not near as rare as the milled ones. There is a nice one of the stamped variety sitting in a local pawnshop as I type this.

[southern boy]

my only problem is the barrel threads have been cut off.

ill have to change out the FSB to a Bulgy

https://www.k-var.com/shop/images/AK-167B.jpg

https://www.k-var.com/shop/product.php?productid=16352&cat=290&page=1

which means lathing the barrel down to .572 from .592

then find a brake for it.

anybody know where i can find this

https://www.k-var.com/shop/images/AK-141B.jpg

https://www.k-var.com/shop/product.php?productid=16336&cat=286&page=1

with 24x1.5 threading for 7.62x39?

also have to get rid of that retarded stock, looks like id have to hit up ironwood for their set.

[FAL GRUNT]

Gunplumber had some 74 style brakes that were US made by FSE. They are good to go for 7.62. If he does not have any left, let me know, I have an extra one.

-myers

[panzertruppe]

I'm assuming you made the trade....????

panzertruppe

[southern boy]

guy pulled out of the deal

[IanMor]

He's probably a member here... Your indecision boned yourself!

[panzertruppe]

Told you didn't I....????

Miniute you mentioned it, the gods of misfortune ripped the carpet rite out from under you... Sorry man...

panzertruppe

[The_Punisher]

FAIL