View Full Version : Can you put a Saiga rifle stock on a SAR-1?
10-02-2004, 10:36 PM
I was wondering if you can put the Saiga rifle stock and put it on the Romanian SAR-1? What parts are involved and how hard is it? Thanks
10-05-2004, 12:42 PM
As long as they both have stamped receivers the stocks should interchange. The problem you will have is with the position of the trigger. The Saiga uses a cam and a special trigger located further back on the action so you can reach the trigger (the sporter stock places your hand farther back than the original P-grip does).
10-13-2004, 03:39 AM
You can stick the Saiga stockin with no problem. If you want to hold it without the SAR-1's p-grip, you'll need to move the trigger assembly as NN said, which would probably require making a new Saiga type linkage or using a Saiga FCG. I see no reason to do this over buying a Saiga. The only use a person had for this method was making CA legal AKs with Saiga stocks and homemade receivers.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.