READYFIRE74
My mosin sniper slash bubba fun gun!I purposely used a scout mount and an added rail to bring the scope back(And to put the rifle back to stock one day if wanted).I have an extra stock so dont cry.......
Turned down bolt from buy milsurp.com Removed front sight, s and k scout mount.and illuminated 4x32 NC scope.I did the trigger job my self with a dremel smoothing all the mating services and putting a slight bend in the spring and its a whole lot better(not perfect)but alot better!The stock was an experiment with some badass woodfiller, 10 days drying time and about 4 hours of shaping with sand paper and a mouse sander.Once dry i took wood glue on a paint brush and went over again to seal it and fil any holes.Once that was dry i sanded smooth ,painted with a stone paint to give it texture and then i went over top of it with a medium gloss 1200 degree paint and its tough as nails!
http://i233.photobucket.com/albums/ee262/readypoo/0411080840a.jpg
http://i233.photobucket.com/albums/ee262/readypoo/0408081030.jpg
Turned down bolt from buy milsurp.com Removed front sight, s and k scout mount.and illuminated 4x32 NC scope.I did the trigger job my self with a dremel smoothing all the mating services and putting a slight bend in the spring and its a whole lot better(not perfect)but alot better!The stock was an experiment with some badass woodfiller, 10 days drying time and about 4 hours of shaping with sand paper and a mouse sander.Once dry i took wood glue on a paint brush and went over again to seal it and fil any holes.Once that was dry i sanded smooth ,painted with a stone paint to give it texture and then i went over top of it with a medium gloss 1200 degree paint and its tough as nails!
http://i233.photobucket.com/albums/ee262/readypoo/0411080840a.jpg
http://i233.photobucket.com/albums/ee262/readypoo/0408081030.jpg