Template

Can anyone get me a copy of a krink receiver template? Would be much appreciated!
Thanks, Buco

The Krinkov types use the same receiver as the parent full size rifle so there is no "krink specific" receiver.

The next question is caliber, type of folder, and country of origin. The original Krinkov was based on the AK74 triangle sidefolder, many of the 7.62 ones are underfolders.

thanks for your input KernelKrink, to tell you more of what I have & am building is a Yugo M-92. It has the metal U/F stock and is in 7.62 x 39 cal. I have tried a couple of templates and they do not match up correctly. And I have also taken into account the %ages of copies and different printers and such. I believe I just do not have the correct Template yet. Do you know anyone who may have pics of a Yugo Krink M-92 build? But I still need the template!
Thanks, Buco

Haven't messed with building any Yugos yet. There is some variation between the front trunnion types on Yugos, some have the bulged RPK style front trunnion and others had a regular AKM style. Different rivet patterns. The rear trunnion should be the same pattern of holes though. The rest is standard AKM. Just make sure the template is specific to the Yugo underfolder pattern as the holes back there vary from country to country.

Never messed with templates myself as I build off flats, but from what I understand there aren't any 100% "correct" ones out there. The bent receiver blanks usually come with their own and due to different corner bend radius between makers each template fits differently on each blank. They all usually need some "adjusting" to fit properly.

Here are some links you might want to peruse:

http://www.akfiles.com/forums/showthread.php?t=28802&highlight=virgin

http://pookieweb.dyndns.org:61129/Yugo/M70/m70.htm

http://pookieweb.dyndns.org:61129/Yugo/M92/m92.htm

http://gunsgutsandgod.com/Yugouf.htm

Try www.ak-builder.com

The M-92 flat IS different than any other. Look at the holes underneath where the pistol grip goes. The pistolgrip hole is round not square. Additionally the contour at the rear trunnion area is different.

What you need is one of Harlands NDS M92 receivers and do your build on it. They are much better than trying to adapt a standard receiver to an expensive as new M92 kit. I am waiting on a PBS5 can to lengthen the barrel to do the build.

+1 on AK-Builder's M-92 flat, that's what I used and it fit perfectly.
Here is a link to my M-92 build (it's continued in a 2nd thread, follow the link near the bottom of this thread) http://www.gunco.net/forums/showthread.php?t=28233

The folder trunnion and the way the PG mounts are the biggest differences between these and a regular AK receiver.

This template is correct for all other items.
http://www.gunco.net/forums/showthread.php?t=727

Forgot about the external grip mount, thanks for pointing that out!