View Full Version : PSA AK-47 and Magpul AK Buttstock

10-31-2016, 09:52 PM
Hello Gents,
Can anybody suggest a remedy for this? Cannot achieve a flush mount at the trunnion.http://i1139.photobucket.com/albums/n550/jcb78/IMG_3818_zpsjhxc0ydd.jpg (http://s1139.photobucket.com/user/jcb78/media/IMG_3818_zpsjhxc0ydd.jpg.html)
http://i1139.photobucket.com/albums/n550/jcb78/00fd2ae3-2cd5-4140-b591-a21908a973bc_zpsy9udlnhm.jpg (http://s1139.photobucket.com/user/jcb78/media/00fd2ae3-2cd5-4140-b591-a21908a973bc_zpsy9udlnhm.jpg.html)

10-31-2016, 10:20 PM
Figure out where it is binding, and slowly and carefully remove material there until it fits.

Palmetto State Armory
11-01-2016, 11:06 AM
Thank you for your purchase.

The PSAK47 was designed to work with the MOE furniture - not sure why your stock does not fit.

If you received it like that, contact CS immediately - they will correct it free of charge.

If you tried to install MOE furniture on a Poly Gun - check your install. No adjustments should be necessary for a correct install.

11-01-2016, 01:50 PM
Ok, thanks Stoned and PSA...appreciate the help

11-08-2016, 05:48 PM
PM'd you last week.
Not getting anywhere with Palmetto customer service whom I've called and emailed several times.
Need some further assistance on this...

Knife wounds
11-09-2016, 10:54 PM
I have installed a few of these. A gap can be caused by tightening the wedge block before you screw it into the tang. You want to attach the tang screw before you tighten the block down. Also lets get a picture with the stock cheek rest removed so we can see how the fitment looks please.