View Full Version : Which compensator?
03-01-2004, 07:53 AM
I have a 7.62 Romanian barrel with a 13mm. O.D. at the muzzle. I threaded it with a 1/2" x 28 die. An AR15 type brake threads on about half way and then bootoms out (I know the caliber is different). What are my options for attaching a compensator, prefferably a 74 type. Are there any out there that will screw right on? Or can I pick up an adapter to go from the U.S. thread to a Russian thread?
03-01-2004, 10:18 AM
I did the same thing. Removed front sight base (so I could get tap to go all the way to where the sight base mounts). Then tapped 1/2 x 28, reinstalled the front sight base, and soldered on a threaded adapter from RPB. The adapter goes from 1/2 x 28 to 24 x 1.5 mm thread for the Bulgie AK74 brake. I blind-pinned the Bulgie brake to the aqdapter. My conversion was done for an SAR-2 in 5.45 x 39 and works great. For 7.62 caliber you would need to ream out the baffle and the exit port on the brake.
03-01-2004, 09:57 PM
Thanks Jim Z. R.P.B.? Which place is that?
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.