replacing AK trigger group

[hcore]

Anyone have a site that can walk me through this? The trigger on my NMH91 broke and I need to replace it. Could I use an european trigger?

[footlongcuban]

Dont waste your time elsewhere. Go straight to RED STAR arms website and you can buy the BEST fully adjustable AK trigger group ever made. They also include instructions on replacement at the website. http://www.redstararms.com

Anyone have a site that can walk me through this? The trigger on my NMH91 broke and I need to replace it. Could I use an european trigger?

[Rhino_66]

Check out this site for FCG instructions and other useful pics:

http://linx310.nothingbutguns.com/fcgremoval.htm

The Red Star Arms set is about the trickest, slickest, and coolest available. But that functionality isn't cheap. I fired a rifle with the RSA trigger group and it is about as close to match rifle quality as you can get for the AK. REALLY smooth. I plan on putting a set on my milled Bulgarian parts kit with a Firing Line receiver.

If you don't want to spend the extra cash for the Red Star group, FSE (First Son Enterprises) and G-Tech (Gordon Technologies) sets are very nice too. I have a G-Tech set in my PMKMS and it's great.

Century parts will work, but require some polishing to get decent results and eliminate the trigger slap. The above site has instructions for polishing the parts, but it's easier to buy a quality set from the start.

Even if you don't buy the Red Star set, you need to check out the site. Especially the Ms. RSA section!!!

[7.62x39]

Tapco bought all the tooling and the rights to the Gordon technoligies FCG.

They are now marketing them themselves as the G2.
Not as nice as the RSA/Power Custom but only half the money

[halfcocked]

I haven't had the pleasure of using the red star triggers yet, but I've been very happy with the G2 ones that I bought. They are very smooth, about as nice as the ones on the Chinese and Bulgarian rifles. Definately no regrets buying them.